Rear venturi on an Elan
5 posts
• Page 1 of 1
The underside of the rear of the Elan seems to lend itself to having a venturi fitted. Anyone done this?
The exhaust location may be an issue.
The exhaust location may be an issue.
- stevebroad
- Fourth Gear
- Posts: 846
- Joined: 08 Mar 2004
Hi Gavin
What are you doing to your car that requires a side exit exhaust?
Steve
What are you doing to your car that requires a side exit exhaust?
Steve
- stevebroad
- Fourth Gear
- Posts: 846
- Joined: 08 Mar 2004
Hi Steve
It follows a Donnington GT spec - flat floor, shell with removable front and rear bodywork running a 2l BDA (small valve BDG), ZF box, sierra rear diff etc etc. I'll probably run 9" front and 11" rear tyres. Suspension will be stiff because the cage is fixed to a spaceframe chassis but can be removed if needed.
The exhaust runs along the passenger side and the dry sump tank is located in the (what was) the passenger footwell.
I have posted some photos under my racecar - the proof.
Wish I could run to a sequential box like you.....
All the best
Gavin
It follows a Donnington GT spec - flat floor, shell with removable front and rear bodywork running a 2l BDA (small valve BDG), ZF box, sierra rear diff etc etc. I'll probably run 9" front and 11" rear tyres. Suspension will be stiff because the cage is fixed to a spaceframe chassis but can be removed if needed.
The exhaust runs along the passenger side and the dry sump tank is located in the (what was) the passenger footwell.
I have posted some photos under my racecar - the proof.
Wish I could run to a sequential box like you.....
All the best
Gavin
One day I'll actually finish - completely - one day....
-
gav - Fourth Gear
- Posts: 538
- Joined: 26 Jan 2004
5 posts
• Page 1 of 1
Total Online:
Users browsing this forum: pianoderby and 18 guests