Lotus Elan 26R replica project for sale
5 posts
• Page 1 of 1
Hi Guys
pics now available at
http://www.flickr.com/photos/26498488@N ... 074462465/
I have the following project for sale contact me on 07740 401519 or
[email protected]
Lotus Elan 26R replica project 1963 S1 Price in region of 18000 gbp
Body
Genuine 26R bodyshell with Chinese Eye lights, Lightweight boot, bonnet, roof, doors., screen surround , front and rear bumpers.
All door locks, lock plates, window channels door handles boot hinges etc.
rear lights, front lights,
Chassis
26R strengthened chassis laser checked.
Suspension
26R front adjustable rose jointed upper wishbones, 26R dogleg bottom wishbones. Uprights rear suspension with sliding spline driveshafts and S1 26R rear hubs
Set of alloy 26R spinners
Drivetrain
Quafe LSD unit, new TTR alloy diff nose, alloy diff rear case, 4 bolt 26R output shafts.
Elan gearbox with alloy bellhousing, propshaft.
Engine
New steel crank, 12 bolt,N/J knife edge, new 5.23 inch long H beam rods, new JE low compression height forged race pistons.
Correct 120E block on std bore. Front covers, jackshaft, sprockets, race BD4 cams,MK1 cam cover with correct oil filler cap, Full race MK2 cylinder head complete with valves springs etc.
Pair of 45dcoe carbs, Fuel cell (out of date for FIA)
Full roll cage with door bars and front cage.
Dual circuit pedal box.
Other misc items
Cheers Dave Hughes
pics now available at
http://www.flickr.com/photos/26498488@N ... 074462465/
I have the following project for sale contact me on 07740 401519 or
[email protected]
Lotus Elan 26R replica project 1963 S1 Price in region of 18000 gbp
Body
Genuine 26R bodyshell with Chinese Eye lights, Lightweight boot, bonnet, roof, doors., screen surround , front and rear bumpers.
All door locks, lock plates, window channels door handles boot hinges etc.
rear lights, front lights,
Chassis
26R strengthened chassis laser checked.
Suspension
26R front adjustable rose jointed upper wishbones, 26R dogleg bottom wishbones. Uprights rear suspension with sliding spline driveshafts and S1 26R rear hubs
Set of alloy 26R spinners
Drivetrain
Quafe LSD unit, new TTR alloy diff nose, alloy diff rear case, 4 bolt 26R output shafts.
Elan gearbox with alloy bellhousing, propshaft.
Engine
New steel crank, 12 bolt,N/J knife edge, new 5.23 inch long H beam rods, new JE low compression height forged race pistons.
Correct 120E block on std bore. Front covers, jackshaft, sprockets, race BD4 cams,MK1 cam cover with correct oil filler cap, Full race MK2 cylinder head complete with valves springs etc.
Pair of 45dcoe carbs, Fuel cell (out of date for FIA)
Full roll cage with door bars and front cage.
Dual circuit pedal box.
Other misc items
Cheers Dave Hughes
Last edited by bigvalvehead on Tue Oct 19, 2010 6:41 pm, edited 1 time in total.
Dave Hughes
S2 26R
Elan DHC Sprint
Shapecraft Honda powered S1(in progress)
Turbocharged 26R clone (also in progress)
Evora 400 development car ex Lotus Factory
S2 26R
Elan DHC Sprint
Shapecraft Honda powered S1(in progress)
Turbocharged 26R clone (also in progress)
Evora 400 development car ex Lotus Factory
-
bigvalvehead - Third Gear
- Posts: 443
- Joined: 11 Sep 2003
- Location: Cardiff Wales
sorry to see your long term project is going - does this mean you have a new project?
thanks again for the alloy spinners - they look great.
thanks again for the alloy spinners - they look great.
Gordon
26/5416
26/5416
- gordont
- Fourth Gear
- Posts: 590
- Joined: 11 Jun 2007
- Location: Sydney, Australia
Hi Gordon
I still have the 26R plus a Sprint plus a seven type chassis plus the Turbo project.
Too many toys and not enough time!!!!
cheers
Dave Hughes
I still have the 26R plus a Sprint plus a seven type chassis plus the Turbo project.
Too many toys and not enough time!!!!
cheers
Dave Hughes
Dave Hughes
S2 26R
Elan DHC Sprint
Shapecraft Honda powered S1(in progress)
Turbocharged 26R clone (also in progress)
Evora 400 development car ex Lotus Factory
S2 26R
Elan DHC Sprint
Shapecraft Honda powered S1(in progress)
Turbocharged 26R clone (also in progress)
Evora 400 development car ex Lotus Factory
-
bigvalvehead - Third Gear
- Posts: 443
- Joined: 11 Sep 2003
- Location: Cardiff Wales
Project now sold
Thanks for those who called/mailed
cheers
Dave
Thanks for those who called/mailed
cheers
Dave
Dave Hughes
S2 26R
Elan DHC Sprint
Shapecraft Honda powered S1(in progress)
Turbocharged 26R clone (also in progress)
Evora 400 development car ex Lotus Factory
S2 26R
Elan DHC Sprint
Shapecraft Honda powered S1(in progress)
Turbocharged 26R clone (also in progress)
Evora 400 development car ex Lotus Factory
-
bigvalvehead - Third Gear
- Posts: 443
- Joined: 11 Sep 2003
- Location: Cardiff Wales
Anyone here?
Paddy
Paddy
1963 Elan S1
-
paddy - Coveted Fifth Gear
- Posts: 1202
- Joined: 27 Oct 2008
- Location: Henfield, West Sussex
5 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 1 guest