REAR COCKPIT PANEL
5 posts
• Page 1 of 1
Post by: Mike Spence » Fri Nov 10, 2023 9:59 am
Hello,
Can anyone give me the dimensions for the panel behind the seats on an S3?
Here is a photo I found here. Suggestions are welcome. With thanks.
Michel
Can anyone give me the dimensions for the panel behind the seats on an S3?
Here is a photo I found here. Suggestions are welcome. With thanks.
Michel
- Attachments
-
- Mike Spence
- First Gear
- Posts: 37
- Joined: 13 Nov 2010
Post by: Elan45 » Fri Nov 10, 2023 4:00 pm
Mike,
You didn't mention whether DHC or FHC and they are totally different. I think I kept the one I removed from my S3-SS DHC many years ago to use for a pattern. But in the USA, I couldn't find a piece longer than 6 or 8 ft and what ever that length was, the pattern was a few inches too long. I am restoring my pre-airflow FHC presently and I can take measurement of it when I get to Florida later this month, if that is what you need.
Roger
You didn't mention whether DHC or FHC and they are totally different. I think I kept the one I removed from my S3-SS DHC many years ago to use for a pattern. But in the USA, I couldn't find a piece longer than 6 or 8 ft and what ever that length was, the pattern was a few inches too long. I am restoring my pre-airflow FHC presently and I can take measurement of it when I get to Florida later this month, if that is what you need.
Roger
'67 Elan S3 SS DHC
'67 Elan FHC pre-airflow
'67 Elan S3 SE upgrade to 26R by Original owner
'58 Eleven S2 (ex-works)
'62 20/22 FJ (ex-Yamura)
'70 Elan +2S RHD
'61 20 FJ project
'76 Modus M1 F3
'67 Elan FHC pre-airflow
'67 Elan S3 SE upgrade to 26R by Original owner
'58 Eleven S2 (ex-works)
'62 20/22 FJ (ex-Yamura)
'70 Elan +2S RHD
'61 20 FJ project
'76 Modus M1 F3
- Elan45
- Fourth Gear
- Posts: 957
- Joined: 23 Nov 2008
Post by: smo17003 » Fri Nov 10, 2023 4:34 pm
This topic covers the FHC panel viewtopic.php?f=36&t=46465
Mike
1967 S3 FHC
1968 S4 FHC
1967 S3 FHC
1968 S4 FHC
- smo17003
- Third Gear
- Posts: 391
- Joined: 11 May 2006
Post by: Mike Spence » Fri Nov 10, 2023 5:54 pm
Thanks already for this info !
The Elan that I am restoring is an S3 DHC !
Michel
The Elan that I am restoring is an S3 DHC !
Michel
- Mike Spence
- First Gear
- Posts: 37
- Joined: 13 Nov 2010
Post by: Mike Spence » Mon Nov 13, 2023 9:43 am
Many thanks to Phil who send me this photo with the dimensions !
- Attachments
-
- Mike Spence
- First Gear
- Posts: 37
- Joined: 13 Nov 2010
5 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 64 guests
Site map
SitemapIndex
RSS Feed