Lotus Elan

How far to rebuild before body fit?

PostPost by: Bitsilly » Thu Jan 19, 2023 8:24 pm

I was wondering if there is any guidance on how far you can build up a rolling chassis before fitting the body?
It looks like I will be waiting a long time for my body to be painted and I have the rolling chassis finished with engine in, exhaust manifolds, alternator, but as I am twiddling my thumbs, and have never done an elan before, can I fit water pipes, etc, etc,
Cheers
Bitsilly
Second Gear
Second Gear
 
Posts: 156
Joined: 03 Dec 2021
Location: Wales

PostPost by: smo17003 » Thu Jan 19, 2023 9:03 pm

I wouldn't bother with anything that has to pass through the bulkhead i.e. heater hoses. The one thing I wish I had done while the body was away was make up a dummy dashboard with ignition switch, gauges, solenoid etc., fit the rad, and rig up a fuel supply. Knowing that the engine is performing as it should, before fitting the body, could be a big time saver.
Mike
1968 S4 FHC
smo17003
Second Gear
Second Gear
 
Posts: 201
Joined: 11 May 2006
Location: Oxford, England

PostPost by: gjz30075 » Fri Jan 20, 2023 3:01 pm

You can't fit the carbs nor the rearmost studs for the carbs before fitting the body.
Greg Z
45/0243K Sprint
36/5727 pre airflow coupe
User avatar
gjz30075
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 3341
Joined: 12 Sep 2003
Location: Roswell, Georgia, USA

PostPost by: snowyelan » Fri Jan 20, 2023 3:52 pm

If you haven't done it already, run a piece of string for pulling the parking brake cable thru the proper holes in the chassis tunnel.
Scott
45/9011
Hawkestone, On, Ca
snowyelan
Third Gear
Third Gear
 
Posts: 441
Joined: 14 Sep 2003
Location: Hawkestone, Ontario, Canada

Total Online:

Users browsing this forum: No registered users and 10 guests