Moulded by Bourne & Co.
4 posts
• Page 1 of 1
Have a look at the Type26Register, engine compartment. You can just see the Bourne tag on the firewall, just above the carb air intake.
Not sure where the Smiths tag goes...but maybe the heater?
http://www.type26register.com/engine_compartment.htm
Here's a picture that Gary put up a while back:
Mark
Not sure where the Smiths tag goes...but maybe the heater?
http://www.type26register.com/engine_compartment.htm
Here's a picture that Gary put up a while back:
Mark
-
Elanintheforest - Coveted Fifth Gear
- Posts: 2489
- Joined: 04 Oct 2005
I'm probably way off the mark comparing my S4 to earlier Cars but the Smiths Plate on mine is glued to the top of the Passenger Footwell below the VIN Plate.
John
John
Beware of the Illuminati
Editor: On Sunday morning, February 8th 2015, Derek "John" Pelly AKA GrumpyBodger passed away genuinely peacefully at Weston Hospicecare, Weston Super Mare. He will be missed.
Editor: On Sunday morning, February 8th 2015, Derek "John" Pelly AKA GrumpyBodger passed away genuinely peacefully at Weston Hospicecare, Weston Super Mare. He will be missed.
-
GrUmPyBoDgEr - Coveted Fifth Gear
- Posts: 2340
- Joined: 29 Oct 2004
4 posts
• Page 1 of 1
Total Online:
Users browsing this forum: MartijnElanS4 and 36 guests