The Sprint rebuild story so far
12 posts
• Page 1 of 1
After purchasing a Sprint and then stripping it down and finding it had been in a bad shunt, the decision was taked by my brother to give it the Spyder treatment.
It's now on a Spyder chassis, the body has been resprayed original colours, the Zetec engine is just getting fitted as can be seen in the photo.
A bit of re-positioning certain bits had to be done because Spyder mainly supplies chassis's for plus 2's and MRD have made some great improvements on their design. All the old parts have been kept, just in case he ever sells it and the purchaser wants to put the old engine etc etc back in??
The end product will be down at Donnington in March if anyone wants a chat about it.
It's now on a Spyder chassis, the body has been resprayed original colours, the Zetec engine is just getting fitted as can be seen in the photo.
A bit of re-positioning certain bits had to be done because Spyder mainly supplies chassis's for plus 2's and MRD have made some great improvements on their design. All the old parts have been kept, just in case he ever sells it and the purchaser wants to put the old engine etc etc back in??
The end product will be down at Donnington in March if anyone wants a chat about it.
- graffiti
- New-tral
- Posts: 12
- Joined: 06 Aug 2007
Nice conversion so far. I especially like the body colored engine bay and the fact that you left the inside of the nose black presumably to keep the body colored engine bay from being seen through the grille. Also, the graphics are superb. You've obviously paid a lot of attention to detail. Where did the intake plenum come from? Did it come with the Z-Tec? Keep us updated and keep up the good work!
Frank Howard
'71 S4 SE
Minnesota
'71 S4 SE
Minnesota
- Frank Howard
- Fourth Gear
- Posts: 919
- Joined: 30 Mar 2004
Some more photo's on progress,
Dashboard wiring almost completed, drivers door hung, Petrol tank and battery in, boot lid on. Radiator should be in this weekend. Engine starts, 180 BHP sounds awsome....seats in at the weekend,
Not too far off being finished now!!
Dashboard wiring almost completed, drivers door hung, Petrol tank and battery in, boot lid on. Radiator should be in this weekend. Engine starts, 180 BHP sounds awsome....seats in at the weekend,
Not too far off being finished now!!
- graffiti
- New-tral
- Posts: 12
- Joined: 06 Aug 2007
Looks stellar. And this from a purist. I like the neatness of the remote clutch/brake reservoir.
Mike Geiger
66 S3 Coupe', no more
66 S3 Coupe', no more
-
type36lotus - Third Gear
- Posts: 275
- Joined: 17 Sep 2003
Looks very nice job and has given me a push to get on with my sprint
Lifted the body today - v pleased to find excellent spyder chassis with no damage - body needs lots of work though
Next job is to strip down, clean, paint, rebush, suspension,brakes etc whilst body is away for about 6 weeks
regards
Chris
Lifted the body today - v pleased to find excellent spyder chassis with no damage - body needs lots of work though
Next job is to strip down, clean, paint, rebush, suspension,brakes etc whilst body is away for about 6 weeks
regards
Chris
- Chris-72-Sprint
- Second Gear
- Posts: 89
- Joined: 21 Jan 2007
A few pictures of this weekends work - lots to do !!
- Chris-72-Sprint
- Second Gear
- Posts: 89
- Joined: 21 Jan 2007
Well it was MOT'd and Taxed yesterday. A few more bits to do before it goes on show at Donnington this weekend. All that's left is badges and a good clean up.
All in all I think the sensible mods made are a real tribute to Chapman and we're extremely please with the end result.
Anyone want to meet and talk about it at the weekend will be most welcome.
I can see this being the number 1 for us now so I think the Plus 2 has to go so if anyone is interested in a very tidy yellow one let me know!!
Nick
All in all I think the sensible mods made are a real tribute to Chapman and we're extremely please with the end result.
Anyone want to meet and talk about it at the weekend will be most welcome.
I can see this being the number 1 for us now so I think the Plus 2 has to go so if anyone is interested in a very tidy yellow one let me know!!
Nick
- graffiti
- New-tral
- Posts: 12
- Joined: 06 Aug 2007
Nick,
Looks really nice job
I am going to try and make Donnington tomorrow so will look out for you
cheers
Chris
Looks really nice job
I am going to try and make Donnington tomorrow so will look out for you
cheers
Chris
- Chris-72-Sprint
- Second Gear
- Posts: 89
- Joined: 21 Jan 2007
Have seen this superb job today.
You have to be really picky to find fault, but hey the guys just got it finished to get it there. Had a good chat about the build, it is something I would like to do, just to have something a bit different.
Definitely NOT for the purist though.
You have to be really picky to find fault, but hey the guys just got it finished to get it there. Had a good chat about the build, it is something I would like to do, just to have something a bit different.
Definitely NOT for the purist though.
-
dougweall - Second Gear
- Posts: 177
- Joined: 12 Sep 2003
12 posts
• Page 1 of 1
Total Online:
Users browsing this forum: SimonH and 12 guests