Twin Cam Engine value
4 posts
• Page 1 of 1
I have a twin cam engine with a weber head. It's just the engine no ancillary parts. I don't know the condition of it it has a 4 bolt flywheel engine is LPXXXXX cam cover is green. i am trying to get a feel for price as I may have to sell it. I will see if I can get a photo of it.
- Watership Down
- New-tral
- Posts: 12
- Joined: 24 Sep 2009
It depends on several factors.
1. Where are you?
2. What is the condition of the engine, e.g. rusty/seized, any rebores, regrinds, head shaved?
The good news is that it's obviously an old engine (4 bolt) & may be good for the racing guys.
1. Where are you?
2. What is the condition of the engine, e.g. rusty/seized, any rebores, regrinds, head shaved?
The good news is that it's obviously an old engine (4 bolt) & may be good for the racing guys.
Phil Harrison
1972 Elan Sprint 0260K
1972 Elan Sprint 0260K
-
pharriso - Coveted Fifth Gear
- Posts: 3199
- Joined: 15 Sep 2010
The green cam covers indicate that it is likely an early type 26 engine with the 1964 factory introduced optional stage 2 modification, cams and Webber jetting changes. If ordered from the factory they changed the cam cover colour from blue to green. I ordered the stage 2 kit in 1964 after my car was delivered - guess what I did with the cam cover? - painted it green. I still get asked about it by those who dont know.
Bill
Bill
Bill Rathlef
Vancouver Island, Canada
"Keep your stick on the ice, boys."
Vancouver Island, Canada
"Keep your stick on the ice, boys."
-
Bill - Third Gear
- Posts: 370
- Joined: 05 Oct 2003
In the UK if the head can be re-used (not warped / rotted waterways/not over-skimmed) then it's around ?1500 ish. Otherwise it's a few hundred???s.
It would be best to take the head off, measure the thickness and how true it is, otherwise from a buyer's perspective it's best to assume that the head isn't re-usable or would need a lot of work to go again.
Mark
It would be best to take the head off, measure the thickness and how true it is, otherwise from a buyer's perspective it's best to assume that the head isn't re-usable or would need a lot of work to go again.
Mark
-
Elanintheforest - Coveted Fifth Gear
- Posts: 2489
- Joined: 04 Oct 2005
4 posts
• Page 1 of 1
Total Online:
Users browsing this forum: Colinleek, MAC2, Yadgi and 24 guests