Elan bonnet foam rubber strip

[marcfuller]

Can anyone provide the dimensions and shape (is it square or trapezoidal or
...) for the strip of foam rubber that is attached to the firewall for the
trailing edge of the bonnet to rest upon when closed? And what color was
it originally?

Thanks in advance!

[saarhus]

I specifically recall that on mine it was triangular shaped in cross section, about one inch wide on the sides.

Stan
66 S3 Coupe'



Can anyone provide the dimensions and shape (is it square or trapezoidal or
...) for the strip of foam rubber that is attached to the firewall for the
trailing edge of the bonnet to rest upon when closed? And what color was
it originally?

Thanks in advance!

[poiuyt]

I use a strip of self stick foam insulation, which comes in different
widths and also in black and white. It does the job. Available at
hardware stores.

Steve B.


--- In ***@***.***, "Stan Aarhus" <saarhus@a...> wrote:

[leojenbo]

I bought the strip from J P Sportscars. It is 2x2cm and 75cm long. The
colour is light grey, but I don't know, if that is original colour.

Leo
1971 Sprint FHC



"Steve B" <***@***.***>
13-04-2005 02:10
Please respond to
lotuselan


To
***@***.***
cc

Subject
Re: [LotusElan.net] Elan bonnet foam rubber strip








I use a strip of self stick foam insulation, which comes in different
widths and also in black and white. It does the job. Available at
hardware stores.

Steve B.


--- In ***@***.***, "Stan Aarhus" <saarhus@a...> wrote: