Part source ?

PostPost by: cabc26b » Sat Dec 22, 2007 8:17 pm

These always looked custom to me ( or modified) but they worked and appeared to be strong enough...... until the hard landing after my roll .

Do these look familiar to anyone ?

Thanks

G-
Attachments
RR-Aarm-bent .JPG and
Note fixture for Rear Anti roll bar ( never used !) and re-inforcment plateing on inboard and out board ends -
cabc26b
Fourth Gear
Fourth Gear
 
Posts: 903
Joined: 21 Sep 2003

PostPost by: garyeanderson » Sat Dec 22, 2007 9:20 pm

Hi George

These are the rear arms I bought from Ray at RD Enterprises 10 or so years ago, similar but not the same. I think Ray was getting some of Tony Thompsons parts, maybe the same source?

Gary
Attachments
Elan rear arm1.JPG and
Elan rear arm.JPG and
User avatar
garyeanderson
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 2634
Joined: 12 Sep 2003

PostPost by: twincamman » Sun Dec 23, 2007 1:41 am

mine came with them --Tony Thompson must have them ---26R rear A arms --ed
Attachments
Picturescloyus suspension ready to remove 018-1.jpg and
dont close your eyes --you will miss the crash

Editor: On June 12, 2020, Edward Law, AKA TwinCamMan, passed away; his obituary can be read at https://www.friscolanti.com/obituary/edward-law. He will be missed.
User avatar
twincamman
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 2463
Joined: 02 Oct 2003

PostPost by: cabc26b » Sun Dec 23, 2007 8:18 pm

Thanks Gary -

I have also heard that Ray gets his elan racing parts from TTR -

Ed - thanks for the photo and Help -

Looks like I may have to get a pair of new arms - I am thing about a set with rod-ends on the outer's and sperical bering on the inner's.

Does anybody have a picture of a TTR ajustable arm and an opinion on them ?
cabc26b
Fourth Gear
Fourth Gear
 
Posts: 903
Joined: 21 Sep 2003

PostPost by: batfish » Mon Dec 24, 2007 7:48 pm

Hi
Pat Thomas at kelsport also sell the 26R rear wishbones, attached link shows a photograph of one.
http://www.kelsport.net/parts/products. ... ctionID=26

Regards
batfish
batfish
Third Gear
Third Gear
 
Posts: 301
Joined: 09 Oct 2003

PostPost by: batfish » Mon Dec 24, 2007 7:50 pm

Hi
Pat Thomas at kelsport also sell the 26R rear wishbones, attached link shows a photograph of one.
http://www.kelsport.net/parts/products. ... ctionID=26

Regards
batfish
batfish
Third Gear
Third Gear
 
Posts: 301
Joined: 09 Oct 2003

PostPost by: elansprint71 » Fri Jan 11, 2008 9:04 pm

cabc26b wrote:Thanks Gary -

I have also heard that Ray gets his elan racing parts from TTR -

Ed - thanks for the photo and Help -

Looks like I may have to get a pair of new arms - I am thing about a set with rod-ends on the outer's and sperical bering on the inner's.

Does anybody have a picture of a TTR ajustable arm and an opinion on them ?


Anything that Tony T sells is top quality, same goes for Pat Thomas; they have both been top dudes in Elan racing since the dinosaurs disappeared!
I've just fitted Spyder adjustable bones, so now there are three sources. I'm not sure which (if any) of these are strictly homologated items; might be best to check if you are running in a strict class.
:wink:

Cheers,
Pete.
User avatar
elansprint71
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 2636
Joined: 16 Sep 2003

PostPost by: Dag-Henning » Mon Jan 14, 2008 1:59 pm

I am afraid adjustable "bones" are not FIA homologated for the Elan....At least not for period F. ( -65). ( - unfortunatley..!!!) :cry:

Dag
Elan S1 -64/ Elan race-replica 26R / Works Escort TwinCam -69/ Brabham BT41 Holbay
User avatar
Dag-Henning
Third Gear
Third Gear
 
Posts: 330
Joined: 30 Sep 2004

Total Online:

Users browsing this forum: No registered users and 14 guests