Lotus Elan

LotusElan.net Unified Search

Search results for: t5 in all categories

123 results found.

7 pages of results.
After a number of speedometer failures due to snapped cables and angle drive failure I stumbled across another approach: a GPS based unit that drives ...
... all that. Thanks for this find. gjz30075 I agree. On my first T5 conversion I had to modify the chassis and cut a hole in the fiberglass ...
Terms matched: 1  -  Score: 16  -  URL: https://lotuselan.net/forums/viewtopic.php?f=31&t=40563
Looking at various options for injection on my +2 stromberg http://www.pattonmachine.com/TBI-Components.htm I hear good things, wondering if there are any long term cases here? The ...
... than I am keen and wil go for it! It will accompany my Tremec T5 nicely. h20hamelan Can't wait to read all about it- keep us posted ...
Terms matched: 1  -  Score: 16  -  URL: https://lotuselan.net/forums/viewtopic.php?f=31&t=48216
Thanks, I have dealt with DB many times. I wondered what the group thinking is on different crank/rod manufacturers? Are forged cranks available? Is QED ...
... narrow journal rods. Engine will be going in my 26R Shapecraft replica complete with T5 gearbox. I'll keep you posted on progress Dave Hughes 26-R-9, Shapecraft 26R ...
Terms matched: 1  -  Score: 16  -  URL: https://lotuselan.net/forums/viewtopic.php?f=12&t=18638&start=15
Maybe an oddball question - but has anyone out there successfully fitted an electronic speedo to replace the standard mechanical speedo?
... John elanman999 I have a Smiths Cobra series gauge to allow easy calibration to the T5 transmission sender. Looks very similar to original (except the 180mph top end ...
Terms matched: 1  -  Score: 16  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=21305
I own a 74 Elan +2s 130/5 which is fitted with the Lotus 5 speed box which I understand uses Maxi internals. I find the ...
... of what mbell suggested. Also a few US enthusiasts are working on converting the T5 gearbox, however their conversions depend on some bits that might not be available ...
Terms matched: 1  -  Score: 16  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=48026
Good morning gentlemen, hope everybody is having a good start to the weekend. As some of you may remember Iíve been working on a 1969S ...
... , lots of options. You can check them out on-line and see if the T5 box ratios suits your driving 1st-3.35, 2nd-1.93, 3rd-1.29, 4th 1.00, ...
Terms matched: 1  -  Score: 16  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=48475
Hi Many apologies for asking this again- but I've lost the info. Before I lose my marbles can anybody supply the following tech details. I ...
... If you can supply the corresponding transmission and/or bellhousing dimensions from say a T5, T9, Isuzu, Alpha Romeo, please do- this type of ...
Terms matched: 1  -  Score: 16  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=23360
I drove an S4 in Sydney about 15 years ago with this box and did not find the ratios any problem; it was a lovely ...
... giving it thought daily. I must admit, I've been thinking steadily about the T5, but your article has me seriously thinking about an Isuzu box. I'll ...
Terms matched: 1  -  Score: 16  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=19828&start=30
Hoping folks can help with a general question regarding MT75 parts. Background is I am not aware of any North American Fords that used this ...
... also doesn?t reference the Scorpio. Stu stugilmour The MT75, like the T5, was offered in various forms with different bell housings, casings and ratios ...
Terms matched: 1  -  Score: 16  -  URL: https://lotuselan.net/forums/viewtopic.php?f=31&t=41175
Burton is selling these bell housings and the write up claims to fit a TC. I am not clear on what transmission then attaches to ...
... / lotus blocks can be bolted to Rocket/Bullet/type 9, Cosworth T5 (originally a U.S. Mustang box), and standard Cortina box etc ...
Terms matched: 1  -  Score: 16  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=26074
Hello all. A ?simple? question for you: Is the Lotus 5-speed transmission a good gearbox to use in a somewhat daily driver. The car is ...
... sell it for a good price which will easily pay for the T9 OR a T5 Alan alan.barker Using a Miata 5 speed gearbox might be a better proposition for ...
Terms matched: 1  -  Score: 16  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=42827
I am looking for a complete 4 speed gear box for a 1964 ?lan S1. Can anyone tell me which model cars and what years ...
... box has "105E" and 7505 cast into the bellhousing. It's got 3L14 T5 and 116E7651B cast on the RHS, with 1 F2 on the LHS. ...
Terms matched: 1  -  Score: 16  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=34140
Hi everyone Anybody know more about Colin Chapman's V8 plus 2 intentions? Has anyone ever installed a small V8 in one of these? Thanks
... that came with the engine was heavy and crap so the TVR chimaera borg warner t5 gear box could take the power and was lighter, the lotus drive shafts ...
Terms matched: 1  -  Score: 16  -  URL: https://lotuselan.net/forums/viewtopic.php?f=51&t=27803&start=
What is the current state of play with regards to 5 speed conversion? I've read, (quite a lot), about the Voight job , but at ...
... done many time with an adapter plate to match the bell housing to block The T5 from a range of US cars has also been an option. I believe ...
Terms matched: 1  -  Score: 16  -  URL: https://lotuselan.net/forums/viewtopic.php?f=31&t=34215
Hi Folks. New member here, great forum! I searched and read quite a bit about Tachometer issues, but found nothing to help me really ( ...
... that I'm going to put another one in my Cortina, I know the Ford T5 will fit the Cosworth block, but it won't fit in the tranny tunnel ...
Terms matched: 1  -  Score: 16  -  URL: https://lotuselan.net/forums/viewtopic.php?f=38&t=2058
Alan, Thank you for posting that. It looks like a really useful kit. There is a guy near me who is a reputable fabricator, so ...
... gets with the two rubber couplings on the side shafts. Having just adapted a T5 (Ford Mustang ) to a 4.2 Jag engine for the Lister that I ...
Terms matched: 1  -  Score: 16  -  URL: https://lotuselan.net/forums/viewtopic.php?f=31&t=34406&start=120
Has anyone began reproducing the one piece plastic Elan +2 console? Every few years I ask. Hoping one day a company will offer a replacement. ...
... the area around the gear lever as a separate piece as I am installing a T5 and this will allow me to move it if needed. I would say ...
Terms matched: 1  -  Score: 16  -  URL: https://lotuselan.net/forums/viewtopic.php?f=36&t=36914
Out by a factor of 2! The Ford Kent 1558cc twin cam weighs about 120kg (I think 60kg is just for the block). So the ...
... and Buick V6, Iron heads. Bellhousings are available for the Buick V6 to T5 gearbox and with the Chevy S10 shifter and tail housing it should be just ...
Terms matched: 1  -  Score: 16  -  URL: https://lotuselan.net/forums/viewtopic.php?f=19&t=19981&start=30
I have recently added a Zetec +2 to my garage to live along side my elan sprint. The Zetec was built in 2007 by a ...
... my S4 FHC with standard gearbox. Now I am considering changing transmissions to a T5 which offers a variety of 5 gear overdrive ratios ( .63 to . ...
Terms matched: 1  -  Score: 16  -  URL: https://lotuselan.net/forums/viewtopic.php?f=51&t=16081
Hello Folks Due to the large number of requests for a summary of the Spyder Zetec talk that took place recently, I enclose a brief ...
... gearboxes has always been a bowl of contention with most people trying to rework the T5 and T9 sierra boxes which are much to long. Spyder use the MT75 ...
Terms matched: 1  -  Score: 16  -  URL: https://lotuselan.net/forums/viewtopic.php?f=16&t=9013
Result Pages: << Previous 1 2 3 4 5 6 7 Next >>


Search took 0.133 seconds