Lotus Elan

LotusElan.net Unified Search

Search results for: servo in all categories

1127 results found.

57 pages of results.
Hi Everyone. My first post on this forum, so here goes I am taking delivery of a sprint dhc this wekend which is in need ...
... you some ideas. Front - replaced old wishbones with Spyder tubular ones - dump servo and replace front caliper/disc and dustshield with the+ 2 ones - ...
Terms matched: 1  -  Score: 77  -  URL: https://lotuselan.net/forums/viewtopic.php?f=19&t=15608
Hi, While I have the engine out of my plus I was thinking, despite my almost brand new master cylinder, I?d switch over to dual ...
... mbell I've been considering this for a while. Are you thinking of ditching the servo, or fitting two ? Foxie The Datsun master cylinder have side bleed ports ...
Terms matched: 1  -  Score: 75  -  URL: https://lotuselan.net/forums/viewtopic.php?f=42&t=38002
Hi All, I know this has been listed before - but i am nearing the completion of my 1968 S3 Elan and have been chipping ...
... , overhauled calipers all round including brand new set to front. Replaced the Girling Servo with Lockheed powerstop type and despite the wife helping bleed the brakes on the ...
Terms matched: 1  -  Score: 74  -  URL: https://lotuselan.net/forums/viewtopic.php?f=42&t=18142
Hi All Not really a new one- I posted some info on this a while back- just an update. I reported that if I didn't ...
... the obvious! Regards John worzel Hi Worzel, I am also using a non servo plus 2 front brake set up on my S4 as you are, but ...
Terms matched: 1  -  Score: 74  -  URL: https://lotuselan.net/forums/viewtopic.php?f=42&t=22225
This is the only pictures I have so far hope it works
... ward to that job but its got to be done . need to get the servo away for refurb " any suggestions" its off the car can`t ...
Terms matched: 1  -  Score: 74  -  URL: https://lotuselan.net/forums/viewtopic.php?f=51&t=16699&start=15
hi all, painted the chassis and the suspension,started to put it back together again when I noticed that the P.O. put the two large rubber ...
... , so no holes are drilled in it, the ? is where dose the servo go?I can't find the 3 holes for the servo bracket. with ...
Terms matched: 1  -  Score: 73  -  URL: https://lotuselan.net/forums/viewtopic.php?f=19&t=20852
My breaks take 2 pedal pushes ,the second is rock solid and the car stops ok.I have got new fluid and they are bled correctly.I ...
... these are expensive] Regards John S4 1969 triumphelan mine turned out to be the servo on its way out.... it was like that for about 3 months.. I ...
Terms matched: 1  -  Score: 73  -  URL: https://lotuselan.net/forums/viewtopic.php?f=16&t=10039
Both front brake callipers are binding on my 69 Elan S4 after driving for a distance of say 5 miles. From starting off from cold ...
... did the callipers. Your advice would be appreciated. fireblade Do you have a servo ? richardcox_lotus Hi, same happened to my S4 and my moden car, ...
Terms matched: 1  -  Score: 73  -  URL: https://lotuselan.net/forums/viewtopic.php?f=42&t=49256
My Elan is S/N 36/6278, built 11NOV66. From reviewing "VIN breakdown by Elan Type and Year" on Lotuselan.net, by Jeff Cocking (hi Jeff). It appears ...
... at least my 66 S2 S/E ) differed in having knock-offs, brake servo, and uprated cams giving a nominal 115bhp. To make matters more confusing ...
Terms matched: 1  -  Score: 72  -  URL: https://lotuselan.net/forums/viewtopic.php?f=16&t=8074
I have been using some of my spare time making this kit together with Michael from Mio Engineering. We have made several different kits all ...
... , but otherwise exactly the same setup. The difference between the standard calipers with servo and the Willwood calipers without servo is like night and day. The best ...
Terms matched: 1  -  Score: 72  -  URL: https://lotuselan.net/forums/viewtopic.php?f=31&t=25990
Those on the list who have owned both the original Elan and the +2 version will be aware that on the +2's there are two ...
... + 2's there are two vacuum connections to the cylinder head, one for the servo and the other for the headlamp system. It occurred to me that only ...
Terms matched: 1  -  Score: 71  -  URL: https://lotuselan.net/forums/viewtopic.php?f=16&t=3275
I'm going to se a 72' Elan Sprint DHC at the weekend - saw the car last sunday at a show and had a brief ...
... the discussions at the weekend the car has had a new chassis, and the servo mechanism for the lights has been changed to the american spec? electric solenoid ...
Terms matched: 1  -  Score: 71  -  URL: https://lotuselan.net/forums/viewtopic.php?f=19&t=20513
I have recently read topics on the forum relating to upgrading brakes and wonder can anyone please answer what may seem a daft question. I ...
... may seem a daft question. I have a 1968 Lotus Elan S4 with no servo fitted, I was going to fit a new servo, but then I ...
Terms matched: 1  -  Score: 71  -  URL: https://lotuselan.net/forums/viewtopic.php?f=42&t=14121
Had the two servos rebuilt made sure the pressure differential valve was centered and put it all back together and the car does stop but ...
... Brake pedal to floor, piston bottoming Had the two servos rebuilt made sure the pressure differential valve was centered and put it all back together and the car ...
Terms matched: 1  -  Score: 71  -  URL: https://lotuselan.net/forums/viewtopic.php?f=42&t=51768
355. +2 brakes : Archive by LotusElan.net [Mailing List Archive]
I know this has ben discussed before but I can't find the tread on the arhives. On my UK spec +2S130 I recntly rebuilt the ...
... been sucked into the master cylinder. To make it mobile I have bypassed the servo and don't really think a servo is required. The pedal is now very ...
Terms matched: 1  -  Score: 71  -  URL: https://lotuselan.net/forums/viewtopic.php?f=16&t=10648
Salut I seem to remember reading about this somewhere on the forum but I can't find it. Anyway, twice now, just after breaking to a ...
... vernon.taylor Salut Vernon, the only similar experience that I have had was when the servo was on the way out, but if its all new then you would ...
Terms matched: 1  -  Score: 70  -  URL: https://lotuselan.net/forums/viewtopic.php?f=42&t=34016
I've done almost 9,000 miles since I got my Plus 2 on the road after a complete nut and bolt restoration. It's been brilliant - ...
... still love driving and improving it. I made a decision not to fit the servo and had the front and rear calipers fully rebuilt by Classic Car Automotive and ...
Terms matched: 1  -  Score: 70  -  URL: https://lotuselan.net/forums/viewtopic.php?f=42&t=37974
Hi all. The ongoing saga of restoring my car has thrown me another curve ball. With a full width rad in place I have nowhere ...
... fit - the outlet for the top hose is wrong, points directly at the servo. Don't ask me how I know that, but if you insist on ...
Terms matched: 1  -  Score: 69  -  URL: https://lotuselan.net/forums/viewtopic.php?f=36&t=20259
Most twincams make tappetty noises, some worse than others, without any problems. Just rest a long screwdriver on the cam cover and put your ear ...
... , It is most likely to be the non return vacuum valve on the brake servo. Try clamping the pipe and drive the car but bear in mind the ...
Terms matched: 1  -  Score: 69  -  URL: https://lotuselan.net/forums/viewtopic.php?f=39&t=17536&start=15
I bought an Elan Sprint (from a member on this forum) last November and spent November and December fettling it and having a bit of ...
... Eventually tracked to the same cause on both cars: a passing seal in the servo was drawing fluid into the engine and it was disappearing out the exhaust in ...
Terms matched: 1  -  Score: 68  -  URL: https://lotuselan.net/forums/viewtopic.php?f=51&t=38887
Result Pages: << Previous 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Next >>


Search took 0.161 seconds