Lotus Elan

LotusElan.net Unified Search

Search results for: servo in all categories

1126 results found.

57 pages of results.
Sorted by relevance / Sort by date
My +2 stops well, this is especially true when The engine is overruning from high revs (high manifold vacuum), when the pedal feel is very ...
... Servo Question My + 2 stops well, this is especially true when The engine is overruning from high revs (high manifold vacuum), when the pedal ...
Terms matched: 1  -  Score: 80  -  URL: https://lotuselan.net/forums/viewtopic.php?f=42&t=1905
It's really starting to look like my recently purchased 1974 Elan Plus 2 might have been a bad idea. In addition to the suspension issues ...
... shot though re smoke out of the exhaust is if the car has a brake servo is that the seals in the brake servo have gone bad and the engine ...
Terms matched: 1  -  Score: 79  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=53158&p=387522
It's really starting to look like my recently purchased 1974 Elan Plus 2 might have been a bad idea. In addition to the suspension issues ...
... shot though re smoke out of the exhaust is if the car has a brake servo is that the seals in the brake servo have gone bad and the engine ...
Terms matched: 1  -  Score: 79  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=53158
Hi, Does anyone know what size/thread the original brass Servo take off pipe from the back of the inlet is? Or where i could get ...
... vac pipe? Hi, Does anyone know what size/thread the original brass Servo take off pipe from the back of the inlet is? Or where i ...
Terms matched: 1  -  Score: 78  -  URL: https://lotuselan.net/forums/viewtopic.php?f=39&t=23267
Hi, I have just put my Lotus Elan SE4 back on the road after a long rest and part restoration. However when I brake as ...
... themselves off and I can pull away. Would this be a fault on the servo? The brakes do stop the car very well and in a straight line ...
Terms matched: 1  -  Score: 78  -  URL: https://lotuselan.net/forums/viewtopic.php?f=42&t=45161
326. Upgrading brakes : Archive by LotusElan.net [Mailing List Archive]
Sorry to be a bit slow here but I have lost the plot as the brake thread has progressed. Can you remove the servo and ...
... have lost the plot as the brake thread has progressed. Can you remove the servo and keep the standard front brakes or do you need to change the size ...
Terms matched: 1  -  Score: 78  -  URL: https://lotuselan.net/forums/viewtopic.php?f=16&t=10264
Since swapping the chassis went to take the car for an MOT and when started the brakes lokck on. On the jack each turned by ...
... I am "pretty" sure we have put everything back as before and the servo was spot on before swapping the chassis has anyone any ideas that might help ...
Terms matched: 1  -  Score: 78  -  URL: https://lotuselan.net/forums/viewtopic.php?f=42&t=16475
Hello, I have an Elan + 2 Year of construction 1969 braking system with a single circuit. If the car is not being driven longer ...
... it is difficult, if not impossible, to bleed. reb53 It is a servo type Gerling. That servo is mounted on the original mounting plate. I ...
Terms matched: 1  -  Score: 78  -  URL: https://lotuselan.net/forums/viewtopic.php?f=42&t=37979
329. brake shudder : Archive by LotusElan.net [Mailing List Archive]
I have an Elan +2 which has the brake servo in place. When braking during high speed I notice considerable vibration from the front of ...
... brake shudder I have an Elan + 2 which has the brake servo in place. When braking during high speed I notice considerable vibration from the front of ...
Terms matched: 1  -  Score: 78  -  URL: https://lotuselan.net/forums/viewtopic.php?f=16&t=11539
Fitted Plus 2 brakes to the front of my Sprint. Disconnected the servo. Also fitted a 26R ant- roll bar. Tried to fit a tandem ...
... today.. Fitted Plus 2 brakes to the front of my Sprint. Disconnected the servo. Also fitted a 26R ant- roll bar. Tried to fit a ...
Terms matched: 1  -  Score: 78  -  URL: https://lotuselan.net/forums/viewtopic.php?f=50&t=43054&start=285
Hi members, In need of a duel/tandem brake master cylinder for my 1970 Elan +2. Mike
... glassfibre anyway as I think the standard arrangement is too flimsy. I'd deleted the servo, so really wanted the buldhead to be stiff and the peddle box to ...
Terms matched: 1  -  Score: 77  -  URL: https://lotuselan.net/forums/viewtopic.php?f=51&t=53477
Hi Everyone. My first post on this forum, so here goes I am taking delivery of a sprint dhc this wekend which is in need ...
... you some ideas. Front - replaced old wishbones with Spyder tubular ones - dump servo and replace front caliper/disc and dustshield with the+ 2 ones - ...
Terms matched: 1  -  Score: 77  -  URL: https://lotuselan.net/forums/viewtopic.php?f=19&t=15608
Hi, While I have the engine out of my plus I was thinking, despite my almost brand new master cylinder, I?d switch over to dual ...
... mbell I've been considering this for a while. Are you thinking of ditching the servo, or fitting two ? Foxie The Datsun master cylinder have side bleed ports ...
Terms matched: 1  -  Score: 75  -  URL: https://lotuselan.net/forums/viewtopic.php?f=42&t=38002
Hi All, I know this has been listed before - but i am nearing the completion of my 1968 S3 Elan and have been chipping ...
... , overhauled calipers all round including brand new set to front. Replaced the Girling Servo with Lockheed powerstop type and despite the wife helping bleed the brakes on the ...
Terms matched: 1  -  Score: 74  -  URL: https://lotuselan.net/forums/viewtopic.php?f=42&t=18142
This is the only pictures I have so far hope it works
... ward to that job but its got to be done . need to get the servo away for refurb " any suggestions" its off the car can`t ...
Terms matched: 1  -  Score: 74  -  URL: https://lotuselan.net/forums/viewtopic.php?f=51&t=16699&start=15
Hi All Not really a new one- I posted some info on this a while back- just an update. I reported that if I didn't ...
... the obvious! Regards John worzel Hi Worzel, I am also using a non servo plus 2 front brake set up on my S4 as you are, but ...
Terms matched: 1  -  Score: 74  -  URL: https://lotuselan.net/forums/viewtopic.php?f=42&t=22225
Both front brake callipers are binding on my 69 Elan S4 after driving for a distance of say 5 miles. From starting off from cold ...
... did the callipers. Your advice would be appreciated. fireblade Do you have a servo ? richardcox_lotus Hi, same happened to my S4 and my moden car, ...
Terms matched: 1  -  Score: 73  -  URL: https://lotuselan.net/forums/viewtopic.php?f=42&t=49256
hi all, painted the chassis and the suspension,started to put it back together again when I noticed that the P.O. put the two large rubber ...
... , so no holes are drilled in it, the ? is where dose the servo go?I can't find the 3 holes for the servo bracket. with ...
Terms matched: 1  -  Score: 73  -  URL: https://lotuselan.net/forums/viewtopic.php?f=19&t=20852
My breaks take 2 pedal pushes ,the second is rock solid and the car stops ok.I have got new fluid and they are bled correctly.I ...
... these are expensive] Regards John S4 1969 triumphelan mine turned out to be the servo on its way out.... it was like that for about 3 months.. I ...
Terms matched: 1  -  Score: 73  -  URL: https://lotuselan.net/forums/viewtopic.php?f=16&t=10039
My Elan is S/N 36/6278, built 11NOV66. From reviewing "VIN breakdown by Elan Type and Year" on Lotuselan.net, by Jeff Cocking (hi Jeff). It appears ...
... at least my 66 S2 S/E ) differed in having knock-offs, brake servo, and uprated cams giving a nominal 115bhp. To make matters more confusing ...
Terms matched: 1  -  Score: 72  -  URL: https://lotuselan.net/forums/viewtopic.php?f=16&t=8074
Result Pages: << Previous 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Next >>


Search took 0.146 seconds