LotusElan.net Unified Search
Search results for: servo in category "Engine / Exhaust / Cooling"
98 results found.
5 pages of results.
1. Master vac : Engine / Exhaust / Cooling by LotusElan.net [Engine / Exhaust / Cooling]
Hello I have a very bad sensation with my brakes Is not very clear , and i would like to suppres the master vac the ...
... master vac lotustus Hi Serge.. My personal experience of when I was getting no Servo Boost (similar to having no vac) was scary. So much pedal ...
2. Brake pressure increases rpm : Engine / Exhaust / Cooling by LotusElan.net [Engine / Exhaust / Cooling]
Hi when I was having the Mot test last week , we got to the part where you hold down the brakes. I noticed this ...
... - It is a symptom of the air valve not sealing. What type of servo? How hard were you pressing? AHM Hi thanks ,it's a replacement ...
3. Idle on three pots : Engine / Exhaust / Cooling by LotusElan.net [Engine / Exhaust / Cooling]
Hi all, got a problem with a big valve motor. All standard on Dellortos. Misfire on idle. Tracked it to number 4 cylinder. Little or ...
... have not been nipped on fitting. Tried a brake pipe clamp tool on the servo pipe, no difference. Does anyone have any experience of the head cracking ...
4. Brass inlet vac pipe? : Engine / Exhaust / Cooling by LotusElan.net [Engine / Exhaust / Cooling]
Hi, Does anyone know what size/thread the original brass Servo take off pipe from the back of the inlet is? Or where i could get ...
... vac pipe? Hi, Does anyone know what size/thread the original brass Servo take off pipe from the back of the inlet is? Or where i ...
5. "Ticking" noise when accelerating : Engine / Exhaust / Cooling - Page 2 by LotusElan.net [Engine / Exhaust / Cooling]
Most twincams make tappetty noises, some worse than others, without any problems. Just rest a long screwdriver on the cam cover and put your ear ...
... , It is most likely to be the non return vacuum valve on the brake servo. Try clamping the pipe and drive the car but bear in mind the ...
6. Location of one way valve for headlight vacuum line : Engine / Exhaust / Cooling by LotusElan.net [Engine / Exhaust / Cooling]
Can someone show me a picture of the proper placement of the one way valve that is in-line for the headlight vacuum line. I have ...
... . The vacuum port in the #4 inlet tract is used for the brake servo in Elans so equipped. Functionally it would make no difference if you used ...
7. Starting problems after sitting : Engine / Exhaust / Cooling - Page 3 by LotusElan.net [Engine / Exhaust / Cooling]
Bill, Battery is full, I always put it back on charge after trying it or having been on a run. I also have a truck ...
... changed to points. The poor starting then began. I think it was the servo sticking that was robbing the air at the mainifold (not helped by two ...
8. Vacumn leak fun and games. : Engine / Exhaust / Cooling by LotusElan.net [Engine / Exhaust / Cooling]
Hi all, My mechanic friend is having problems tracking down the source of a vacumn leak on our S4 with dual webers. Just had the ...
... the guides and the car can be tuned and run just fine with the brake servo and headlamp pods disconnected. The minute they are reconnected the mixture goes all ...
9. Engine Smoking : Engine / Exhaust / Cooling by LotusElan.net [Engine / Exhaust / Cooling]
Well, the disaster of my new Lotus Elan Plus 2 continues to plunge to new depths. I bought this car 2 months ago and enjoyed ...
... . Tom Lotus49 Tom, Smoke, steam or burning hydraulic fluid from the brake servo getting into the engine or whatever it is I am pretty sure that it ...
10. Odd Puffs Of Smoke : Engine / Exhaust / Cooling by LotusElan.net [Engine / Exhaust / Cooling]
Hi guys, Ever since I have owned my +2 (3 years) I have had an intermitently smokey exhaust. It generally doesn't smoke excessively, and doesn't ...
... anyway! Anyone have any thoughts? Cheers Tim tdafforn If you have a brake servo, could very well be brake fluid as it can be drawn in cylinder ...
11. Weber Jetting : Engine / Exhaust / Cooling by LotusElan.net [Engine / Exhaust / Cooling]
Hi all, I'm sure this won't be a new one, but hoping that somebody might be able to help me with this one. My +2 ...
... aligned. I'll carry out some further checks. AdrianSi Hi , Sounds like a servo or headlamp leak .. that`s if the plus 2 has a ...
12. NPTF or BSPT ? : Engine / Exhaust / Cooling by LotusElan.net [Engine / Exhaust / Cooling]
I want to replace the vacuum adapter on the No1 inlet runner with a plug (servo now removed). The adapter has a tapered thread, what ...
... want to replace the vacuum adapter on the No1 inlet runner with a plug (servo now removed) . The adapter has a tapered thread, what size do ...
13. Engine Smoking : Engine / Exhaust / Cooling - Page 2 by LotusElan.net [Engine / Exhaust / Cooling]
Tom, As I have said before diagnosis by forum is just guesswork! There are umpteen options when things go wrong with an internal combustion engine ...
... internal combustion engine and it's components. However brake fluid could be leaking from the servo to inlet manifold pipe for instance if there is an excess of it. ...
14. Vacuum Pipe Routing : Engine / Exhaust / Cooling by LotusElan.net [Engine / Exhaust / Cooling]
Hi Folks How do the vacuum pipes run when the car has a single brake servo and fail safe headlamps? I have attached a sketch ...
... Hi Folks How do the vacuum pipes run when the car has a single brake servo and fail safe headlamps? I have attached a sketch showing what I think ...
15. Sprint Radiator Installation : Engine / Exhaust / Cooling by LotusElan.net [Engine / Exhaust / Cooling]
It's time to re-install the radiator - I have the two different sized blanking plates for either side of the rad., and can see from ...
... that runs across the engine bay by the rad - is it along with the servo pipes / on the front chassis cross member/ or where else? Anyone ...
16. Coolex radiator Plus 2 : Engine / Exhaust / Cooling by LotusElan.net [Engine / Exhaust / Cooling]
Who’s fitted one of these Coolex rads to a Plus 2, I have a question or two. http://www.coolexperts.co.uk/product/lo ... struction/
... Did you have any issues fitting the radiator? And did you buy your brake servo as a kit? i've still got the Mk2A which I'm having issues with ...
17. Master cylinders on a 1969 Plus 2 : Engine / Exhaust / Cooling by LotusElan.net [Engine / Exhaust / Cooling]
Hi, I have been following these forums for some time. There is a lot of knowledge out there so I hope someone can help with ...
... the clutch and a Girling 5/8 runing the brakes (connected to the servo) . This did not seem right to me. I would have throught ...
18. DAMN VACUUME! : Engine / Exhaust / Cooling by LotusElan.net [Engine / Exhaust / Cooling]
Oh the joys.. spent a very fiddly and frustrating few hours this morning replacing the vacuume pad on my +2.. put it all back together, ...
... take off points, one is for the headlights and the other for the brake servo. The connection for the servo is not through the valve as the servo ...
19. Heater hose : Engine / Exhaust / Cooling by LotusElan.net [Engine / Exhaust / Cooling]
Hello All A few questions on heater hose please? How does the heater hose stay connected to the engine block as my block seems to ...
... top one almost looks like the vacuum pipe take off for the Plus 2 brake servo. ~~ ~~ ~~ ~~ ~~ ~~ ~ ...
20. Calliper Piston Material question : Engine / Exhaust / Cooling - Page 2 by LotusElan.net [Engine / Exhaust / Cooling]
The other thing that can cause excessive initial pedal travel is taper wear on the disks or pads or misalignment between the disks and calipers ...
... the calipers, new master cylinder, new discs&pads, I bypassed the servo/remote cylinder and "Voila!!" nice firm brake pedal. ...
Search took 0.182 seconds