LotusElan.net Unified Search
Search results for: cv shafts in all categories
739 results found containing all search terms.
Refine your search by category:
- Classifieds (132)
- Mailing List Archive (87)
- General (144)
- Body / Chassis / Frame (23)
- Drive Train / Gearbox / Final Drive (309)
- Electrical / Instruments (2)
- Engine / Exhaust / Cooling (16)
- Racing (5)
- Mods (19)
- Misc. (2)
50 pages of results.
Hi Eric. Welcome back. It looks like lousy weather through the weekend. Does a meeting on Saturday, April the 5th work for you, say about ...
... on this issue and he suggests my CV joint system should upgraded with new high ... ? Eric showed me several differential output shafts exhibiting plastic deformation in the spline area ...
377. Spyder chassis to body spacing again! : Body / Chassis / Frame by LotusElan.net [Body / Chassis / Frame]
Back to work on the chassis change, and complete rebuild. I am using the Spyder instructions and inverting the front engine mounts. At this point, ...
... , a UV joint is not a CV joint so some harmonic imbalance will result ... appears to me that the transmission output shaft should be parallel to the diff input ...
378. About Turn.... : Elan Discussions by LotusElan.net [General]
From some earlier posts about rear wishbones/driveshafts/half shafts on my elan sprint I've gone from one thing to another - I've now decided to fit ...
... years. Most had solid u-joints or CV joints of one type or another and ... about rear wishbones/driveshafts/half shafts on my elan sprint I've gone from ...
I had a problem last year with serious vibration under braking at a specific speed, around 45mph in my +2. Warped disks I thought, so ...
... fronts OK, but Oh Dear, CV boot perished on the drive shaft conversion ... I considered doing the work & even got the bits, but poor weather and ...
380. 45/6988 Alive : Archive by LotusElan.net [Mailing List Archive]
Just to report that, after an accident in 1991, stored in a warehouse , two owner changes ( the last in August 2000 to me) ...
... the neighbourhood to make sure the new CV jointed half shafts etc were working OK ... Now to fit the windscreen , some more test drives and then for road registration ...
On a Sprint that I bought a few years ago, the Facet pump was installed on the vertical fibreglass face next to the fuel tank. ...
... I also like invisible improvements such as CV shafts, LED lights and electronic ignition ... It is good to be out there in warm weather again though. Eric in ...
382. CV joint replacement : Drive Train / Gearbox / Final Drive by LotusElan.net [Drive Train / Gearbox / Final Drive]
About 12 years ago I fitted the Sue Miller CV conversion to my Plus2. All good for 20k miles, but on pre MOT inspection I ...
... CV joint replacement About 12 years ago I fitted the Sue Miller CV conversion ... at least 5mm before the diff output shaft moves. My question is how much ...
383. prop shaft for a 5 speed gearbox : Drive Train / Gearbox / Final Drive by LotusElan.net [Drive Train / Gearbox / Final Drive]
I am fitting a 5 speed box in my plus 2, but still need propshaft, can anyone assist, do you have one or do know ...
... is 39.5 inches to middle of each CV joint, getting closer can anyone provide ... prop shaft for a 5 speed gearbox I am fitting a 5 speed box ...
384. Rotoflex couplings : Drive Train / Gearbox / Final Drive by LotusElan.net [Drive Train / Gearbox / Final Drive]
Does anyone have any experience of using Triumph GT6/Vitesse Rotoflex couplings in place of the Lotus originals, which can now cost up to £200 each ...
... cushioning of the driveline with an outer CV would be the way I would go ... and universal joints in the rear drive shafts with Tony Rudd, the firm's Director ...
385. Hissing sound from diff : Drive Train / Gearbox / Final Drive - Page 2 by LotusElan.net [Drive Train / Gearbox / Final Drive]
As I'm about to reinstall my diff after pinion seal replacement, I have some concerns I'll find a similar issue. To avoid getting there and ...
... suspension in full droop. Same for CV joints (even on a + 2 ... running it before connecting the cv drive shaft - though I did realize the lack ...
386. Rear Damper Top Nut Question : Suspension / Steering / Brakes / Wheels / Tyres by LotusElan.net [Classifieds]
Dear Rear Suspension Experts, I am about to install new Koni dampers I purchased from TTR. My old red Konis had a slotted nut at ...
... get to that point 6. Install CV drive shafts between differential and (now ... goes through the center of the damper shaft. Many thanks! -John jbeach Would ...
387. Rear dampers for a Plus 2 - Monroe MR246? : Suspension / Steering / Brakes / Wheels / Tyres - Page 3 by LotusElan.net [Classifieds]
Hi guys just about to fit my Gaz rear inserts. The nyloc that was supplied is a different size to the castle nut that I ...
... reduced extension which is good for my cv shafts. Lined up at the top ... what did you use to centre the shaft in the lotocone? Cheers therolfie Hi ...
388. Ditching the donuts : Drive Train / Gearbox / Final Drive - Page 2 by LotusElan.net [Drive Train / Gearbox / Final Drive]
Right, thanks all. Is it possible to do the grinding with the shafts in place on the car, or is this too risky with sparks ...
... that, I take it that the CV joints don't need the annual greasing. ... possible to do the grinding with the shafts in place on the car, or ...
389. Hissing sound from diff : Drive Train / Gearbox / Final Drive by LotusElan.net [Drive Train / Gearbox / Final Drive]
Hi all Went for a spin this morning and noticed a hissing sound coming from the rear of the car, when accelerating or with the ...
... suspension in full droop. Same for CV joints (even on a + 2 ... previous position, as marked on the shaft / nut prior to disassembly. I ...
390. 122bhp at the flywheel, only 82 at the wheels - drag? : Engine / Exhaust / Cooling by LotusElan.net [Engine / Exhaust / Cooling]
Have had an early style head fitted on my S1 along with a set of 40DCOE02 carbs, it is a very original car so keeping ...
... friction: dr-shaft, wheel bearings, cv joints etc AND if you ask me ... with only a set of kelvedon Cv shafts and reduced droop shocks i was getting ...
Search took 0.131 seconds