LotusElan.net Unified Search
Search results for: cv shafts in all categories
737 results found containing all search terms.
Refine your search by category:
- Classifieds (132)
- Mailing List Archive (87)
- General (144)
- Body / Chassis / Frame (23)
- Drive Train / Gearbox / Final Drive (307)
- Electrical / Instruments (2)
- Engine / Exhaust / Cooling (16)
- Racing (5)
- Mods (19)
- Misc. (2)
50 pages of results.
The parts I have found the most difficult to find have been: correct heater and choke valve cables (1/4 turn to lock) I ended up ...
... and go with a Tony Thompson racing CV driveshafts Circa ?500 more expensive but ... surely? Can you get CV jointed shafts for that sort of price, now ...
362. Sprint versus S3 : Elan Discussions by LotusElan.net [General]
We have had an S3 for 12 years and 65,000 miles now. Kept on top line, nonetheless there`s the odd creak and rattle, just as ...
... period. The car came with JAE CV driveshafts, which I decided to leave ... style fitting bigger brakes,better drive shafts,5 speed gear box etc etc ...
363. Old Rotoflex : Elan Discussions by LotusElan.net [General]
The S4 I just purchased has been off the road for 30 some years. One of the reasons may be due to a broken rotoflex ...
... show car, I'd be likely fitting CV shaft to the car. mbell The ... I was able to remove the drive shaft after much difficulty. The bolts are ...
364. Any advantage to retaining the rubber donuts : Drive Train / Gearbox / Final Drive - Page 2 by LotusElan.net [Drive Train / Gearbox / Final Drive]
Ford Escorts and suchlike run the same diff with no rubber cushioning so I wouldn’t be too concerned about the diff at least. This is ...
... risk of damage to the diff from CV joints is a lot lower than likely ... I wouldn't fit anything else but solid shafts, but for the requirement of a ...
365. CV Driveshafts : Drive Train / Gearbox / Final Drive - Page 7 by LotusElan.net [Drive Train / Gearbox / Final Drive]
'Dogrings'. Weird name and I dont see the connection with CV driveshafts. I curious the 'forward inertia that drives the wheel and axle forward' that ...
... CV Driveshafts Dogrings' Weird name and I dont see the connection with CV driveshafts ... I said that he had described the shafts as 300mm long but I wanted to ...
366. Hopping Rear : Suspension / Steering / Brakes / Wheels / Tyres - Page 4 by LotusElan.net [Classifieds]
Wow, lot’s of good comments. A lot to unpack here. I will try to respond to all the comments. If I missed something please let ...
... this a perfect time to introduce the CV joint debate? Gets popcorn. 661 ... Then heat the bolt and the drive shaft ear to good and hot and bash ...
When discussing splined half shaft and the use of non- rubber donut shafts in the 26R, one must realize that the shafts used in 26Rs ...
... had ACBC had the choice of todays CV joints, he might have been convinced ... & The Elan When discussing splined half shaft and the use of non- rubber ...
368. rear end : Archive by LotusElan.net [Mailing List Archive]
My s4 is saging over to to r/hand side at the rear end,when I measure from ground to the wheel arch there is a 1.5 ...
... that the ujoint on the after market CV rear axle had separated from one of ... new U-joint press fitted onto the drive shaft - shall I have the right axle ...
369. Rotoflex couplings : Drive Train / Gearbox / Final Drive by LotusElan.net [Drive Train / Gearbox / Final Drive]
Well, after 45 years it's finally time to replace my doughnuts. I have a fairly serious tear in the left outboard doughnut. I have read ...
... years. I'm thinking of fitting Miller CV drives when my doughnuts next fail. ... of a few old unstrengthened' drive shafts as late as 1972. Having said ...
370. Driveline Clunk : Elan Discussions by LotusElan.net [General]
Recently somewhere in the driveline a metal to metal loud clunk could be heard if the clutch is dumped with power on. I feared it ...
... on. I feared it was a CV joint failing or even worse a spline ... this is more likley with solid drive shafts than with donuts but can happen with ...
Hi. I have 2 leaks that were identified in a mechanical inspection when first buying my '68 +2 a few months ago. I was told ...
... the drive joints be they Rotoflex or CV and then removing diff output shaft. ... is the n/s diff drive shaft seal. I have not much inclanation ...
Hi Eric. Welcome back. It looks like lousy weather through the weekend. Does a meeting on Saturday, April the 5th work for you, say about ...
... on this issue and he suggests my CV joint system should upgraded with new high ... ? Eric showed me several differential output shafts exhibiting plastic deformation in the spline area ...
373. Spyder chassis to body spacing again! : Body / Chassis / Frame by LotusElan.net [Body / Chassis / Frame]
Back to work on the chassis change, and complete rebuild. I am using the Spyder instructions and inverting the front engine mounts. At this point, ...
... , a UV joint is not a CV joint so some harmonic imbalance will result ... appears to me that the transmission output shaft should be parallel to the diff input ...
374. why compress rear suspension to remove? : Suspension / Steering / Brakes / Wheels / Tyres by LotusElan.net [Classifieds]
I have raised the car, removed the wheels and am about to remove brakes, a-frames and loosen cv drive bolts. The next step (according to ...
... to remove brakes, a-frames and loosen cv drive bolts. The next step ( ... towards you and remove the CV drive shaft and disc. put a jack under ...
HI , My name is Anton and i am from Belgium . I have a Elan+2s 130/5 . With every rotation of the back wheel ...
... or has the car been converted to CV or UJ type drive shafts? check ... drive shafts as the rubber couplings degrade with time and use, also check the ...
Search took 0.136 seconds