Lotus Elan

LotusElan.net Unified Search

Search results for: bonnet catch in all categories

548 results found containing all search terms.

28 pages of results.
I have some advice. "Never buy a partly dismantled car." I love my Elan but sometimes.... The restoration is progressing painfully slowly. Almost everything generates ...
... pivots on. 2 Remove the metal hood/roof/top front locating stip ... !!), wait til she catches then a little bit of choke ( ...
Terms matched: 2  -  Score: 43  -  URL: https://lotuselan.net/forums/viewtopic.php?f=16&t=2987
Good spot, I've sent them a mail about there screen rubber, the picture they have of said rubber has 90 degree corners? May well be ...
... with a pop then bounce over your bonnet. Grizzly Good advice. Thanks all ... on the out side just ready to catch it if it pops out, some ...
Terms matched: 2  -  Score: 43  -  URL: https://lotuselan.net/forums/viewtopic.php?f=36&t=34192&start=30
I have done loads of winter maintenace to have a bob on Elan. Had quite a few problems that I never had before. Confidence is ...
... I'll bet that if I had the hood down, I would not even hear ... the rubber/poly bits were just catching the torque rods, hence the noise ...
Terms matched: 2  -  Score: 43  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=16294
WARNING - Thread Drift! Vince, With respect to your comment about plugs, Dave Walker of Emerald reckons that once a plug is fouled it never ...
... ) . I fitted it under the bonnet on the bulkhead near the bonnet catch ... my Plus 2. Made a simple bracket so it was vertical with the car ...
Terms matched: 2  -  Score: 43  -  URL: https://lotuselan.net/forums/viewtopic.php?f=40&t=43943&start=15
Sounds like you have a high resistance join in the ignition power supply somewhere to see 10.8 volts under load at the coil . If ...
... ignition until you can get under the bonnet and pull the wire off the live ... the steering column, disconnect the bonnet catch, choke cable, eyeball vent pipes ...
Terms matched: 2  -  Score: 43  -  URL: https://lotuselan.net/forums/viewtopic.php?f=40&t=40367&start=30
All - Yet another surprise! My 'radiator' on my S2 basket case is a full four inches thick, the proper width and height - but ...
... good laugh. I'm also concerned about bonnet and fan blade clearance with something this ... to add fluid to the system or catch overflow. There is, however, ...
Terms matched: 2  -  Score: 43  -  URL: https://lotuselan.net/forums/viewtopic.php?f=16&t=3066
Afternoon all I'm working on a new book on the Elan and Plus 2 for Veloce. It's what I'm calling a 'Source Book' which gathered ...
... , putting the screws for the Elans bonnet latches in from inside the cabin so ... can undo the clips when the bonnet cable breaks or buying the three pronged spinner ...
Terms matched: 2  -  Score: 43  -  URL: https://lotuselan.net/forums/viewtopic.php?f=50&t=45720
Hello, first of all confess I'm a Triumph man but please don't let that put you off - I may end up a member! I'm ...
... thing I miss is the hinge forward bonnet that gave superb engine access as well ... pushing the door to fully engage the latch , then try to open. Does ...
Terms matched: 2  -  Score: 43  -  URL: https://lotuselan.net/forums/viewtopic.php?f=51&t=45983
Hi all, First off Sorry for making yet Another Door seal thread. After searching possibly the most asked about Topic (door seals) and getting a ...
... the door jam (level with the Hood tray) then the chrome finisher slides ... By the time I got to the latch area, there was no bulb left ...
Terms matched: 2  -  Score: 43  -  URL: https://lotuselan.net/forums/viewtopic.php?f=36&t=32407
In the process of cleaning up my 71 +2S I’ve owned since the ‘70’s and now have retirement time to work on. The reverse lights ...
... gear, or somewhere in the under hood area? Perhaps the non-standard wire colours ... beside the car. Bud English Good catch Bud. I was correcting myself even ...
Terms matched: 2  -  Score: 43  -  URL: https://lotuselan.net/forums/viewtopic.php?f=38&t=48534
Just discovered my gauge has no probe and tube (has obviously been cut off the gauge a long time ago). I have ordered a new ...
... it on its own below the LH bonnet lock and followed the wiring loom down ... cable, just below the offside bonnet catch then runs down to the body ledge ...
Terms matched: 2  -  Score: 43  -  URL: https://lotuselan.net/forums/viewtopic.php?f=51&t=43614
As today is Bank Holiday Friday, I thought I'd have a bit of a potter about in the garage. I got quite a few little ...
... silicone around the pedal box under the bonnet. If I'm really lucky the major ... future) . Lubricated the passenger door latch, rods and levers. I'm not ...
Terms matched: 2  -  Score: 43  -  URL: https://lotuselan.net/forums/viewtopic.php?f=51&t=41573
Hello Our car is chassis number 60 and has some early features that I have read about. We've got the original wide windscreen chrome and ...
... crudely removed in the mould. The bonnet was lifted by 2 springs at the ... integrated locks and a boot lock with latch. TeeJay What is a double curvature ...
Terms matched: 2  -  Score: 43  -  URL: https://lotuselan.net/forums/viewtopic.php?f=51&t=40158
Hello Peeps Youve all probably realised that I pick up bits of this restoration as parts availability, access and the whim takes me. Ive just ...
... high on RHS and air box catching bonnet return lip on torque movement - shutting ... too high on RHS and air box catching bonnet return lip on torque movement - ...
Terms matched: 2  -  Score: 43  -  URL: https://lotuselan.net/forums/viewtopic.php?f=36&t=40453&start=
Brill' Richard, Keep the faith and get on with it. I am at the stage now where the pressure is off (apart from the windows ...
... fit, seat to fit and fit hood cover ass'y to finish interior. Winter ... life much simpler. Bulkhead to bonnet catch/release cable attachmnt for eg. ...
Terms matched: 2  -  Score: 43  -  URL: https://lotuselan.net/forums/viewtopic.php?f=19&t=15608&start=150
Hello - I bought a 130 S project car a couple of weeks ago. It is almost complete apart from a few odds and ends. ...
... Recently at our Sebring track day the bonnet was popping up due to cornering forces ... pop; might need to adjust the latches a bit. HTH stugilmour ...
Terms matched: 2  -  Score: 43  -  URL: https://lotuselan.net/forums/viewtopic.php?f=51&t=26307
Hi All, I am having some difficulties fitting the following parts and would be grateful of others thoughts and experiences: The fitting of Screen pillar ...
... seal trim lip' along the windscreen/hood support. Then fit the door seal ... people. One to push one to catch! The trims are then easy to ...
Terms matched: 2  -  Score: 43  -  URL: https://lotuselan.net/forums/viewtopic.php?f=36&t=16817
I agree. It seemed to be spectacularly original and not to be tampered with except for safety and road worthiness reasons. As I mentioned at ...
... I really liked the crazing on the bonnet. It takes almost half a century ... the charcoal canister. So the "catch tank" next to the gas tank ...
Terms matched: 2  -  Score: 43  -  URL: https://lotuselan.net/forums/viewtopic.php?f=19&t=36967&start=105
Isn't that the color combination of the car Sean22 is looking for?
... power bulge in the middle of the bonnet? ..... Oh I get it.. ... I left her at the airport to catch a bus home. Hope you find ...
Terms matched: 2  -  Score: 43  -  URL: https://lotuselan.net/forums/viewtopic.php?f=51&t=35531&start=15
I'm a Lotus SevenS2 owner ( for 35 years) in New Zealand looking to replace the Seven with an Elan S1 or S2. In NZ ...
... you can adapt the S3/S4 hood to S1/S2 doors .. ... type 26 and 45 and the door latches are different too. I'm not saying ...
Terms matched: 2  -  Score: 43  -  URL: https://lotuselan.net/forums/viewtopic.php?f=19&t=39772
Result Pages: << Previous 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Next >>


Search took 0.154 seconds