Lotus Elan

LotusElan.net Unified Search

Search results for: cv shafts in all categories

737 results found containing all search terms.

50 pages of results.
I've been thinking through the ramifications of replacing the rubber donuts halfshafts with a constant velocity joint axles system before proceeding. It seems that the ...
... donuts so I cannot say whether putting CV joints on has your explained consequences, ... necessary change of length of the half shafts of IRS was a double U jointed ...
Terms matched: 2  -  Score: 144  -  URL: https://lotuselan.net/forums/viewtopic.php?f=16&t=6362
The S1 Elan - at least the early ones had a different pitch circle diameter (PCD) for the donut coupling spider bolts from the later ...
... I couldn't find one. For the CV conversion I had to make adaptor plates ... Elan drive shaft coupling PCD for S1 The S1 Elan - at least the ...
Terms matched: 2  -  Score: 144  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=17430
Hi all After having purchased new cv driveshafts,I have this morning tried to install one side. Having got the 3 studs located in the diff ...
... Cv driveshaft installation help needed Hi all After having purchased new cv driveshafts, ... allow the hub to swing out? Shafts were purchased from Kelvedon and the studs ...
Terms matched: 2  -  Score: 143  -  URL: https://lotuselan.net/forums/viewtopic.php?f=42&t=30601
274. Driveshafts : Drive Train / Gearbox / Final Drive by LotusElan.net [Drive Train / Gearbox / Final Drive]
Hi. New to Elan ownership. Have bought a S4 FHC. This has probably been asked a thousand times before, but what are the thoughts on ...
... Personally, i have the KELVEDON LOTUS cv driveshafts and upto now i can't fault ... i understand they are same as the shafts sold by PNM (made by Shaftec ...
Terms matched: 2  -  Score: 143  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=48067
Have standard spec sprint, with new set of rotoflex. Car used for mostly for road but will be off to various track days. Question is ...
... Rotoflex or CV Conversion ? Have standard spec sprint, with new set of ... u/j's with a sliding spline shaft and have never looked back Go for ...
Terms matched: 2  -  Score: 142  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=2125
Hi all, Probably been covered before, but I came across PNM Engineering. https://www.pnmparts.co.uk/elan-plus2-6 ... t-kit-9663 They do look the part, has anyone used these? Any ...
... CV Driveshafts Hi all, Probably been covered before, but I came across ... definitely look like the Miller/Kelvedon shafts. pharriso I've got Col at elantribits ...
Terms matched: 2  -  Score: 142  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=49606
Two of my Elans came with Ray's driveshafts, I've run them for many years without any sort of problem.
... which was why suppliers went over to CV joints as these were more forgiving? ... problem. Mazzini I used the Kelvedon shafts on my Plus 2. They seemed ...
Terms matched: 2  -  Score: 142  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=36672&start=30
Hi Listers, My S4 DHC is with Paul Matty for it's annual MOT and service...I've had the dreaded call I was waiting for, my Rotoflex ...
... fitted spyder (one do-nut - one cv joint) shafts to my _+ 2 ... shot and rather than risk a drive shaft to the buttocks, it's time to ...
Terms matched: 2  -  Score: 142  -  URL: https://lotuselan.net/forums/viewtopic.php?f=16&t=6841
Purchased from RD Ent. , may apply to others. You guys know which are similar , I'm just passing thru helping my friend on his ...
... CV drive axles Don't let them sag Purchased from RD Ent. , may ... from sliding back. Why aren't axle shafts recessed , or given a bump stop ...
Terms matched: 2  -  Score: 141  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=24105
At the moment, I am trying to pull the diff out, to change the gears, and to repaint the pretty new scratched Spyder frame. All ...
... body off the frame. I've the CV conversion, and cannot get the diff ... diff, and one of the CV shafts is not releasing from the inner joint ...
Terms matched: 2  -  Score: 141  -  URL: https://lotuselan.net/forums/viewtopic.php?f=16&t=12387
Gentlemen, First I'd live to introduce myself. My name is Paul and I live in British Columbia. I've been into old cars for a long ...
... you should probably seriously consider changing to CV Drive shafts at the rear, because ... needs the rubber doughnut on the drive shafts and both sill members replaced. Any ...
Terms matched: 2  -  Score: 140  -  URL: https://lotuselan.net/forums/viewtopic.php?f=39&t=34372
Hi All, Does anyone recognize this CV driveshaft assembly? They have been on the car for 20 years or more. The GKN joints' part number ...
... CV driveshaft ID.. Hi All, Does anyone recognize this CV driveshaft assembly ... is a slight rumble when the drive shafts are turned by hand. Their grease ...
Terms matched: 2  -  Score: 140  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=52959
Hi All, I get my painted S4 Elan body back tomorrow and I have ordered a pair of CV drive shafts and limited damper inserts ...
... and I have ordered a pair of CV drive shafts and limited damper inserts to ... before the body goes back on. Can anyone tell me how the best/ ...
Terms matched: 2  -  Score: 140  -  URL: https://lotuselan.net/forums/viewtopic.php?f=42&t=46704
A pair of SKF bearings c?10 delivered off eBay Sure those are genuine? There is a lot of fakery about. Also, the sizes are quoted ...
... concern is the additional stresses that fitting CV joints will introduce. JonB I think ... . Will they fit properly onto a shaft machined to an Imperial size? Example ...
Terms matched: 2  -  Score: 139  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=41056&start=45
285. Donut fitting : Archive by LotusElan.net [Mailing List Archive]
I've replaced donuts twice. First, either get one large or two spiral radiator type hose clamps and put them around the circumference of the donut. ...
... life time and you should buy a CV joint conversion. regards Rohan rgh0 Is ... to attach the donuts to the half shaft flanges. Appreciate you taking the yime ...
Terms matched: 2  -  Score: 138  -  URL: https://lotuselan.net/forums/viewtopic.php?f=16&t=8078
Result Pages: << Previous 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 Next >>


Search took 0.124 seconds