Lotus Elan

LotusElan.net Unified Search

Search results for: replacing engine in category "Electrical / Instruments"

685 results found containing all search terms.

46 pages of results.
Jon brought up the 550kg (1212.75 lbs) light weight street Elan Coupe in the caster topic, and Patrick responded with some questions. Seeing Ed is ...
... go would be the stock seats and replace with a kart seat. The hardtop ... legal. It uses a Golf GTi engine. Body is carbon fibre,plastic ...
Terms matched: 2  -  Score: 53  -  URL: https://lotuselan.net/forums/viewtopic.php?f=38&t=18921
Can someone who's radiator is out please take and post a picture of the earth strap that grounds their steering column enabling the horn to ...
... . poiuyt Another simpler alternative is to replace the factory joint with an all metal ... disappeared one time when he pulled the engine. Dan collins_dan Before you start taking ...
Terms matched: 2  -  Score: 53  -  URL: https://lotuselan.net/forums/viewtopic.php?f=38&t=13866
He says he does not carry the require bits and you find out three hours later. This happened to me today. Booked my car in ...
... The Emerald has been THE choice of replacement ECU for most K'sters and it's not ... the combustion process going on inside the engine. You want to aim for 5 ...
Terms matched: 2  -  Score: 53  -  URL: https://lotuselan.net/forums/viewtopic.php?f=38&t=1859
I have recently purchased one of Ray Dent's windscreen wiper switches and it seems to be different to the original switch. The original one has ...
... component fault burnt the contacts. The replacement switches are real shiny plastic finger pushes ... I then went as a Guarantee Electrical engineer commissioning new unmanned ships built in Japan ...
Terms matched: 2  -  Score: 53  -  URL: https://lotuselan.net/forums/viewtopic.php?f=38&t=32124&start=
Hi, After getting my +2S I discovered that the air horns had been replaced with a modern horn (to be honest, I didn't even know ...
... discovered that the air horns had been replaced with a modern horn (to be ... (it's not much wider than the engine), but the left hand side ...
Terms matched: 2  -  Score: 51  -  URL: https://lotuselan.net/forums/viewtopic.php?f=38&t=32815
I have now reached the stage in the resto where the body is stripped and ready to go to the body shop However I found ...
... several "extra" wires presumably to replace burnt out wires. As I dont ... wiring behind the dash and in the engine bay looks like it has been fried ...
Terms matched: 2  -  Score: 50  -  URL: https://lotuselan.net/forums/viewtopic.php?f=38&t=16437
Since I purchased my 1970 +2S (Federal) last year, I've been having problems with the headlights. Most critical is that the headlamps only come on ...
... the unit out with the intention to replace, but was unable to find one ... Should be only one ground in the engine compartment. Through the years, all ...
Terms matched: 2  -  Score: 50  -  URL: https://lotuselan.net/forums/viewtopic.php?f=38&t=22623
Hi, I've fitted the TTR electronic ignition system on my +2 a month ago, everything works very well except the rev counter, so I've bought ...
... the old rev counter, when you replaced it did you join the 2 wires ... the coil / ignition switch, the engine won't start, there is no ignition ...
Terms matched: 2  -  Score: 50  -  URL: https://lotuselan.net/forums/viewtopic.php?f=38&t=18057
I am replacing the wiring harness in my S4 and have a question on the hook up ot the pulse wire from ignition swith to ...
... S4 Sprint Tachometer hookup I am replacing the wiring harness in my S4 and ... assuming the coil is located in the engine bay) would need two extra runs ...
Terms matched: 2  -  Score: 48  -  URL: https://lotuselan.net/forums/viewtopic.php?f=38&t=23775
Question 1 - The factory manual just says to tension the fan belt appropriately...exactly what does that mean? I know that I don't want it ...
... ? Question 2 - I'm planning to replace my voltage regulator with a terminal block ... loss how to solve this,the engine was rebuilt when I got it with ...
Terms matched: 2  -  Score: 48  -  URL: https://lotuselan.net/forums/viewtopic.php?f=38&t=19399
In the process of swapping to crank fired ignition, so i've a trigger wheel and sensor on the crank. A side effect of this is ...
... two capacitors. They are easy to replace and should make the tach reliable again ... that i have a digital readout of engine revs and its alot different to what ...
Terms matched: 2  -  Score: 48  -  URL: https://lotuselan.net/forums/viewtopic.php?f=38&t=44699
Has anyone used a Triumph GT6 washer pump / switch to replace the (almost) unobtainable original? At ?25 it seems good value, but would it ...
... Triumph GT6 washer pump / switch to replace the (almost) unobtainable original? ... clueless and I also hunted around an engineering stores with no joy. In the ...
Terms matched: 2  -  Score: 48  -  URL: https://lotuselan.net/forums/viewtopic.php?f=38&t=33003
My Sprint has a 3 Ohm (internally ballasted) coil chassis to engine ground strap but still a bit hit see a comment in the coil ...
... it cranks quite fast. I have replaced the usual suspects, Battery, Coil ... , checked trunk ground & chassis to engine ground strap but still a bit hit ...
Terms matched: 2  -  Score: 48  -  URL: https://lotuselan.net/forums/viewtopic.php?f=38&t=47747
Hi my nane is Denis Peirce i live in Northamptonshire and im in the process of restoring a s4 se dhc elan.I have replaced all ...
... restoring a s4 se dhc elan.I have replaced all of the wiring looms and the ... could read these to you from the engine bay as its open next door to ...
Terms matched: 2  -  Score: 48  -  URL: https://lotuselan.net/forums/viewtopic.php?f=38&t=23169
Good morning !! The 0-60 psi oil pressure gauge in my Plus 2 really needs repair or replacement. It registers 30psi on start up and ...
... my Plus 2 really needs repair or replacement. It registers 30psi on start up ... doesn't respond significantly to engine revs. A substitute 0-100 psi gauge from a Mini ...
Terms matched: 2  -  Score: 48  -  URL: https://lotuselan.net/forums/viewtopic.php?f=38&t=52530
Result Pages: << Previous 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 Next >>


Search took 0.146 seconds