LotusElan.net Unified Search
Search results for: cv shafts in category "Mailing List Archive"
87 results found containing all search terms.
6 pages of results.
31. Half shaft problem : Archive by LotusElan.net [Mailing List Archive]
Well, I solved last week's wishbone misalignment problem the easy (expensive) way with new, adjustable ones. That's fine. But this week's problem (if I worked ...
... ) is that the shiny, new CV joints that I bought to solve the ... Half shaft problem Well, I solved last week's wishbone misalignment problem the easy ...
32. Rotoflex rubber compound. : Archive by LotusElan.net [Mailing List Archive]
Hi Guys, It has been suggested to me (by UK specialist) that current Rotoflexes use a poorer compound due to todays' manufacturing restrictions on additives ...
... others that replace both rubber couplings with CV joints? Spyder say you need one ... solution would be to uprate the stub shafts and diff then use CV joint both ...
33. CV Conversion - a question : Archive by LotusElan.net [Mailing List Archive]
Hello all, It seems the issues of doughnut durability relative to angular range of motion have been covered, as have driving impressions of CV joints. ...
... CV Conversion - a question Hello all, It seems the issues of doughnut ... it had dual CVs in its rear shafts. Anyone investigated that system as a ...
34. Reducing droop (ooer!) : Archive by LotusElan.net [Mailing List Archive]
Hi All, I was wondering whether any one has attempted to reduce the droop on the rear suspension of a +2? I would like to ...
... Both my Elan and Plus 2 have CV joint drive shafts and spax inserts that ... to save grinding the new sliding spline shafts I have, and was wondering how ...
35. CV conversion. : Archive by LotusElan.net [Mailing List Archive]
Hi listers, the conversion to CV shafts is complete and I'm impressed with the way the car feels. I did have to cut off the ...
... CV conversion. Hi listers, the conversion to CV shafts is complete and ... impressed with the way the car feels. I did have to cut off the ...
36. Rubber donuts : Archive - Page 2 by LotusElan.net [Mailing List Archive]
and I bet that after 500k he still has a silly smile on his face. Now 500k is a lot of miles. Let say the ...
... the drive line if you go the CV way. Concerning the strain I will ... just remove bearing retainer and tap stub shaft out. The bearing dust seals are ...
37. CV Boots to +2 Hub : Archive by LotusElan.net [Mailing List Archive]
Paul, how do the CV boots attach to the +2 hub? I've never taken the hubs apart but assume they are either bolted or splined? ...
... CV Boots to + 2 Hub Paul, how do the CV boots attach ... listers, how do the Bean drive shafts fit; splined into the diff and ...
38. Donuts. : Archive by LotusElan.net [Mailing List Archive]
Hi guys, I've finally had to replace the donuts on the +2, the cracks are now too bad. I've done this on the past on ...
... old donuts. I've purchased Mick Millers CV drive shaft replacements (467 GBP inc ... ), so I don't have to be too careful but I don't want to ...
39. Drive Shafts : Archive by LotusElan.net [Mailing List Archive]
The Elan Factory in Melbourne, Australia (good exchange rate on the Aussie dollar) sell a really good conversion using i think CV joints. Contact Steve ...
... a really good conversion using i think CV joints. Contact Steve Taylor, email ... Drive Shafts The Elan Factory in Melbourne, Australia (good exchange rate on ...
40. Mick Miller Drive Shafts : Archive by LotusElan.net [Mailing List Archive]
Hi All, Flushed with success having fitted my screen..... Phew! My thoughts return to driveshafts. I know it's an old well worn subject but I ...
... John, I have the Mick Miller CV set up on my + 2, ... Mick Miller Drive Shafts Hi All, Flushed with success having fitted my screen.. ...
41. Donuts Dual Purpose? : Archive by LotusElan.net [Mailing List Archive]
I've been thinking through the ramifications of replacing the rubber donuts halfshafts with a constant velocity joint axles system before proceeding. It seems that the ...
... donuts so I cannot say whether putting CV joints on has your explained consequences, ... necessary change of length of the half shafts of IRS was a double U jointed ...
42. Time To Replace the Rotoflex!! : Archive by LotusElan.net [Mailing List Archive]
Hi Listers, My S4 DHC is with Paul Matty for it's annual MOT and service...I've had the dreaded call I was waiting for, my Rotoflex ...
... fitted spyder (one do-nut - one cv joint) shafts to my _+ 2 ... shot and rather than risk a drive shaft to the buttocks, it's time to ...
43. lots of questions. a new dirty thing to dissassemble. : Archive by LotusElan.net [Mailing List Archive]
At the moment, I am trying to pull the diff out, to change the gears, and to repaint the pretty new scratched Spyder frame. All ...
... body off the frame. I've the CV conversion, and cannot get the diff ... diff, and one of the CV shafts is not releasing from the inner joint ...
44. Donut fitting : Archive by LotusElan.net [Mailing List Archive]
I've replaced donuts twice. First, either get one large or two spiral radiator type hose clamps and put them around the circumference of the donut. ...
... life time and you should buy a CV joint conversion. regards Rohan rgh0 Is ... to attach the donuts to the half shaft flanges. Appreciate you taking the yime ...
45. Rubber donuts : Archive by LotusElan.net [Mailing List Archive]
Eat donuts. Just thought I would give my opinion on this having just been through the ordeal- it was time to replace the donuts on ...
... holes. After hearing that the replacement CV joint option would cost me $1500 ... adapter plates, Lobro CV's and drive shafts made up of two Golf (Rabbit ...
Search took 0.171 seconds