Lotus Elan

LotusElan.net Unified Search

Search results for: cv shafts in category "Drive Train / Gearbox / Final Drive"

309 results found containing all search terms. 862 results found containing some search terms.

79 pages of results.
I believe the standard S1 shafts had a smaller PCD for the donuts than the later cars ( though they used the same donuts) so ...
... CV Driveshaft kit nomad wrote: rgh0 wrote: I believe the standard S1 ... had a smaller PCD for the donuts than the later cars ( though they used ...
Terms matched: 2  -  Score: 161  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=34052&start=15
I've got hold of a Mk1 1500 Cortina gearbox and also a Mk1 Escort Mexico 2000E box. I've checked the 1st gear ratio of the ...
... Plan A. Still trying to work out what to do really. The input shaft on the Cortina box is 17mm and that on the Mexico box is 15 ...
Terms matched: 1  -  Score: 161  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=27479
Hi all, Anybody any thoughts on using a set of sierra rear drive shafts as a base for making some solid drive shafts for an ...
... right, that's a pair of solid cv shafts for less than 200 quid doing ... sierra rear drive shafts for + 2 conversion Hi all, Anybody any thoughts ...
Terms matched: 2  -  Score: 161  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=31774
Gents, Has anyone removed a tail shaft seal through the inspection hatch? After putting in a welch plug there is still a leak although smaller. ...
... Gearbox tail shaft seal removal Gents, Has anyone removed a tail shaft seal through the inspection hatch? After putting in a welch plug there is still a ...
Terms matched: 1  -  Score: 160  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=53386
Hi gents, in the midst of rebuilding my gearbox and have just removed the input shaft bearing, while parts diagrams show a spacer or washer ...
... input shaft bearing, is there a spacer? Hi gents, in the midst of rebuilding my gearbox and have just removed the input shaft bearing, while ...
Terms matched: 1  -  Score: 160  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=36755
I'm thinking about changing my driveshafts to the UJ/sliding spline type. What's the difference between the Tony Thompson ones and the types sold by Paul ...
... can also supply drive shafts with 2 CV joints, check with his website. ... kit. I'm pretty sure PM buys shafts from Susan Miller. nebogipfel The SM ...
Terms matched: 2  -  Score: 159  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=13075
Hi All, After a recent chassis change on my +2 I've started driving the car a bit...a lot....more again and I've discovered that I have ...
... of my CVs on my Mick Miller CV drive shafts. Plenty of miles on ... What CVs are used in the Mick Miller CV Driveshafts? Mine are from around ...
Terms matched: 2  -  Score: 159  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=47425
To split the case you need to remove the other drive shaft. It will probably be twisted also. The spline will have failed where it ...
... followed by no drive To split the case you need to remove the other drive shaft. It will probably be twisted also. The spline will have failed where ...
Terms matched: 1  -  Score: 159  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=40965&start=45
Is there any vantage to retaining the rubber donuts, Is it easier on the drive train in the long run
... axles, and three I converted to CV joints. Having had two Rotoflex failures ... been fitted the with uprated diff output shafts and the top diff mountings had heavy ...
Terms matched: 2  -  Score: 158  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=51224
Hi all, As the title says I have a vibration that goes through the whole car (S3 SE DHC) it starts at about 60kph and ...
... mount, new diff muntings as well. I am thinking that perhaps the tail shaft may be out of balence but then why would it only occur on acceleration ...
Terms matched: 1  -  Score: 157  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=28088
I lived in Essex from 1980 to 1985 a sliding spline joint. Anyone remember the manufacturer whatever happened to them?
... Drive shaft manufacturer in Leigh or WestCliffe in Essex UK I lived in Essex from 1980 to 1985 & from 1982-985 had a + 2 130/5 ( ...
Terms matched: 1  -  Score: 157  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=26428
Evening, I have bought some spares which include a pair of drive shafts. They look identical to the picture on Sue Miller's website. At either ...
... CV driveshafts Evening, I have bought some spares which include a pair of ... shafts. They look identical to the picture on Sue Miller's website. At either ...
Terms matched: 2  -  Score: 156  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=40247
A solution for elan owners who discover that their elan is fitted with an inboard four bolt 26R style diff output shaft, and a three ...
... Four Bolt - Three Bolt - Elan CV Drive Shafts. A solution for elan ... who discover that their elan is fitted with an inboard four bolt 26R style diff ...
Terms matched: 2  -  Score: 155  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=42767
image.jpg Yes it's a G clamp with a groove and Angle steel welded on. Used this tool on my Ginetta G15, made lining the holes ...
... Oops! just remembered, I have CV shafts. On a more serious note ... I hope I never have to do any work on the rear suspension that involves ...
Terms matched: 2  -  Score: 155  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=36219
Hi all, Spent time yesterday looking over the elan and freed off brakes including handbrake so took it for a short run on som grass ...
... Any advice welcome on fitting cv driveshaft conversion Hi all, Spent time yesterday ... not too hard to get the old shafts and Rotoflex couplings removed. After that ...
Terms matched: 2  -  Score: 155  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=23219
Result Pages: << Previous 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Next >>


Search took 0.119 seconds