Lotus Elan

LotusElan.net Unified Search

Search results for: cv shafts in category "Drive Train / Gearbox / Final Drive"

309 results found containing all search terms. 862 results found containing some search terms.

79 pages of results.
As you will have seen from my roll cage post I am slowly unpicking a number of the items stuck on the Elan Sprint I ...
... the Rotoflex's. I wouldn't say the CV shafts are fit and forget but they ... Drive shafts As you will have seen from my roll cage post I am ...
Terms matched: 2  -  Score: 177  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=46633
212. Arg... : Drive Train / Gearbox / Final Drive by LotusElan.net [Drive Train / Gearbox / Final Drive]
So I decided I'd better crawl under the car and make sure everything was ok before the drive to LOG41. And found a torn CV ...
... to LOG41. And found a torn CV boot. 11 months after I replaced ... the clamps, holding the boots on shaft? h20hamelan 661 wrote: In that ...
Terms matched: 2  -  Score: 176  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=51343
Hello, I have a 72 Federal +2 which will likely have the rotoflex doughnuts exchanged for CV joints in the next few weeks. A friend ...
... likely have the rotoflex doughnuts exchanged for CV joints in the next few weeks. ... + 2 Differential OP shafts Hello, I have a 72 Federal + 2 ...
Terms matched: 2  -  Score: 176  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=17935
Has anyone got Mick Miller or similar driveshafts fitted? Any niggles or accolades? I have some in my +2 and so far ok but the ...
... CV Driveshafts Has anyone got Mick Miller or similar driveshafts fitted? Any niggles ... I fitted TTR UJ/Sliding Spline Shafts to my S4 during it's rebuild. ...
Terms matched: 2  -  Score: 176  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=19803
Hi all. In the past few days there has been quite a discussion on this forum about the pros and cons of CV drive shaft ...
... CV Drive Shafts - Lets Take A Look In The Parts Bin. Hi ... . In the past few days there has been quite a discussion on this forum ...
Terms matched: 2  -  Score: 175  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=26451
Re curing rear disk rotor runout, looking for practical ways of achieving this. It would seem impossible to perform on car disk machining as the ...
... for (in my case) the CV joint. All the best Andy Hodgkinson ... 3 mounting spots on the outboard drive shaft, or manufacturing tolerances from the disk ...
Terms matched: 2  -  Score: 175  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=19473
I need to true my rear outer axle shafts. Is there a common way to mount on a metal lathe? I can mount between centers ...
... True'ing outer rear shafts I need to "true" my rear outer axle shafts. Is there a common way to mount on a metal lathe? I ...
Terms matched: 1  -  Score: 175  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=21123
I know this is going to open up a can off worms and be subject to every bodys opinion,but the question has to be asked...what ...
... a big fan of my Mick Miller CV driveshafts.. but my car is just' ... to be asked..what are the best drive shafts to get and from who? these ...
Terms matched: 2  -  Score: 175  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=20059
Good news - this is the last major thing to do before the engine etc goes in (I know not in the way, just want ...
... just want to have the conversion the CV set up done first) . Bad ... specific type of slide hammer for output shaft removal Good news - this is the ...
Terms matched: 2  -  Score: 174  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=47559
My car has been fitted with a pair of solid driveshafts with U/Js' either end which I think were made by a company called Performance ...
... J would be. Could it be a standard part as fitted to the prop shaft or are there lots of different sizes? William2 Hi William. There are ...
Terms matched: 1  -  Score: 172  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=41192
It's no so much changing the seal as ensuring that you get the nut back on exactly the same. Doable but convenient? Especially if you're ...
... for those of you with Sue Miller's CV joints. My output shafts are " ... convenient? Especially if you're doing output shaft seals and possibly bearings? MarkDa Well ...
Terms matched: 2  -  Score: 170  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=41056&start=15
I would not know who makes the best CVs Alan, they do not interest me. I had you down as an 'original' man anyway. Isn't ...
... CV Driveshafts 512BB wrote: I would not know who makes the best CVs ... replaced their donuts with TTR hook jointed shafts. The donuts weren't up to the ...
Terms matched: 2  -  Score: 170  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=49606&start=30
Hi, Yesterday I pulled the engine/transmission to investigate a transmission leak on the Lotus 5 speed box. The cause of the issue showed it self ...
... . The cause of the issue showed it self when separating the gearbox and prop shaft, the oil was leaking down the shaft into the flange and leaking out ...
Terms matched: 1  -  Score: 170  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=50351
I'm in the process of helping a friend put his S3 back on the road the car had only been rolled about in the workshop, ...
... , as she no longer offers her CV conversions, due to problems with them ... . BUT.. Arguably the best quality Drive shafts are http://www.elantrikbits.com/ ...
Terms matched: 2  -  Score: 169  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=36672
Hi all, newbe here, had my plus 2 since september and been doing a pre MOT check over looks like the rotoflex needs changing. I ...
... similar to the Spyder setup (one CV, one donut) that I fitted ... I have to remove the complete drive shaft or can i replace the rotoflex from ...
Terms matched: 2  -  Score: 168  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=25396
Result Pages: << Previous 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next >>


Search took 0.182 seconds