Lotus Elan

LotusElan.net Unified Search

Search results for: cv shafts in category "Drive Train / Gearbox / Final Drive"

309 results found containing all search terms. 862 results found containing some search terms.

79 pages of results.
I found the input shaft on my gearbox to have a fair amount of movement so I'm going to replace the large input shaft front ...
... Replacing bearings in 4 speed gear box I found the input shaft on my gearbox to have a fair amount of movement so I'm going to replace the large ...
Terms matched: 1  -  Score: 206  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=34411
Hi Due to trouble with mine, I bought a new yoke from a famous provider. Unfortunately, the one I received was 6 mm too longer ...
... Wrong prop shaft yoke Hi Due to trouble with mine, I bought a new yoke from a famous provider. Unfortunately, the one I received was 6 ...
Terms matched: 1  -  Score: 203  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=39808
When the engine is mated to the gearbox should the end of the main shaft that locates in the crankshaft and the shaft splines that ...
... Splined shaft greasing When the engine is mated to the gearbox should the end of the main shaft that locates in the crankshaft and the shaft splines that engage ...
Terms matched: 1  -  Score: 203  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=33521
I picked up a later differential for my S1 which means the drive flange doesn't match the drive shaft. The normal cure for this is ...
... a later differential for my S1 which means the drive flange doesn't match the drive shaft. The normal cure for this is to change the input hub in the ...
Terms matched: 1  -  Score: 202  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=36002
I have a stuborn diff out put shaft - normally I tap them out per the manuel , gently, ... On this particular dif I ...
... trick for sticky diff outputshaft ?? I have a stuborn diff out put shaft - normally I tap them out per the manuel , gently, .. ...
Terms matched: 1  -  Score: 200  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=16968
The speedo drive and driven gears both appear to be selected based on the desired ratio required for accurate speedometer function - not just the ...
... come in two designs - the longer of the two are usually looser on the shaft than the shorter ones. I usually fit with bearing compound just to stop ...
Terms matched: 1  -  Score: 199  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=47631&hilit=Quaiffe&start=15
Counting my lucky stars. Couple of months ago I changed all brake pads. Ever since I've had a soggy brake pedal so I thought I'd ...
... UK got a set of Plus 2 CV driveshafts going begging at a knock-down price ... frogeyesimon I have Hardy Spicer type drive shafts in mine-they have been there since the ...
Terms matched: 2  -  Score: 199  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=40303
Salut Along with Leslie's lovely looking diff, I managed to find a good diff case and late output drive shafts for not much money (always ...
... Removing diff output shaft bearings Salut Along with Leslie's lovely looking diff, I managed to find a good diff case and late output drive shafts for not much ...
Terms matched: 1  -  Score: 199  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=24926
I also have the Mick Miller CV's fitted this winter, but have noticed that they have quite a lot of radial play in them, can ...
... CV Driveshaft Conversion Jas wrote: I also have the Mick Miller CV's fitted ... of cups on the end of the shaft that's flexing relative to the outer body ...
Terms matched: 2  -  Score: 199  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=21192&start=15
Hello All. Has any one had any experience trying to lengthen their driveshaft? I've taken it to a shop that does this routinely but was ...
... you say machining locators do you mean the spigot on the flanges that centre the shaft ? Ian elansprint Darren, there's a few issues here you need to think ...
Terms matched: 1  -  Score: 198  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=22240
I've read a lot about the merits of replacing the rotoflex couplings with drives shafts such as those sold by Susan Miller or Tony Thompson. ...
... much more crisp and rewarding with te CV or Hooke joint conversions. CBUEB1771 Hi ... of replacing the rotoflex couplings with drives shafts such as those sold by Susan Miller ...
Terms matched: 2  -  Score: 198  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=16269
I have these fitted on my +2 and am very happy with them. There is, however, one minor niggle which you should look out for. ...
... SM CV Drive Shafts I have these fitted on my + 2 and am ... happy with them. There is, however, one minor niggle which you should ...
Terms matched: 2  -  Score: 197  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=14591
Rohan, I used to use strings for lay cluster but found it easier to just turn the box over onto its flat top face. Give ...
... the box over onto its flat top face. Give a little rotation on the shaft and all drops almost in place. I have little centre drill holes in ...
Terms matched: 1  -  Score: 197  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=47631&hilit=Quaiffe&start=45
179. Rotoflexes : Drive Train / Gearbox / Final Drive by LotusElan.net [Drive Train / Gearbox / Final Drive]
Randall Fehr, Tim Mullen, P-O Hakansson, and et-al: Please review and provide comments on this tech write-up concerning Rotoflex replacements. This write-up was created by ...
... King <lawrenc Had mine converted to CV joints 13 years ago. Haven't had ... . Check for size by fitting the shafts to the donuts with the correct fastener ...
Terms matched: 2  -  Score: 195  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=2383
Hi to all, Ok, back on task to dismantle the gearbox. With the extension housing removed, the Workshop Manual says to ??drive the countershaft towards ...
... Stuck Shaft? Hi to all, Ok, back on task to dismantle the gearbox. With the extension housing removed, the Workshop Manual says to ? ...
Terms matched: 1  -  Score: 194  -  URL: https://lotuselan.net/forums/viewtopic.php?f=37&t=22620
Result Pages: << Previous 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Next >>


Search took 0.151 seconds