LotusElan.net Unified Search
Search results for: cv shafts in category "Racing"
5 results found containing all search terms. 60 results found containing some search terms.
5 pages of results.
Not sure if I am barking up the right tree but it has been suggested that changing the caster to about 6 deg will help ...
... wishbones look like Andy andyelan Jon1986: What style driveshafts are you using? Presumably CV style but if they are sliding spline you could have a problem with the ...
47. 26r Headlamps : Racing - Page 2 by LotusElan.net [Racing]
Hi Johan, Thanks for the nice comments. I bought the kit from Pat Thomas at Kelvedon. He can supply you with the back plates (in ...
... sixties and was fitted with many 26R parts in period: - Roller spline drive shafts, suspension including Adjustable Armstrongs, plus a steel billet crank and other goodies ...
At last! Have been concerned about a hill climb season running my original 1964 steel wheels - just a set of rivets stopping the wheel ...
... a 150 HP TC with no issues. I do have TTR axles, spline shafts (no donuts), and coil over shocks. Certified Lotus So far ...
I just got back to working on the rear of my track S4. It is 26 R type unused (NOS) black chassis with TTR A ...
... tolerances are critical to get everyting to line up without to much load on the shaft to twist the lower A frame to achieve alignment. If they are not ...
50. Frame Modifications II : Racing by LotusElan.net [Racing]
Here are the rest. All additional metal was 14 ga other than plate under front crossmember which was 12 ga. I will post additional photos ...
... pump in the rear. The thought of a broken u-joint and a flailing prop shaft against a fuel line is not a pleasant one. One of the reasons ...
After (too) many races under rain , my friend Jean-Pierre and I are decided to do somethings for the wipers of its Elan GTS ... ...
... done. I guess the upgrade at least doubles the torque delivered to the wiper shafts. I installed the kit on the Jaguar when I saw its astronomical price ...
Does or has anyone made a completely adjustable rear arm? Adjustable for camber as well as toe? I am racing a +2 with street radial ...
... just as well. A hose clamp. not too tight, on the damper shaft will show you haw much travel you are actually using and where the rubber ...
53. FIA Appendix K : Racing - Page 2 by LotusElan.net [Racing]
Yeah similar rules apply here in my historic production sports car racing class that allow links to be added but springs and links to not ...
... lift at which coil bind occurs and in others as the lift of the cam shaft lobe I need to spend a few hours trying to put it all together ...
At the insistence of my son, I am going to go back on the track in the Elan. I am not quite a spry as ...
... Elan application. They didn't list an Elan spec, I just gave them the shaft dimensions and made them to suit. High quality, tight spline fit. ...
55. Magnesium Parts : Racing - Page 2 by LotusElan.net [Racing]
I was looking in to how to treat my new mag cases and wheels since I was sure I would get trapped in the rain ...
... not permitted. Both aluminium and magnesium materials are allowed for bell housing, tail shaft housing and differential housing. High-capacity aluminium radiators may be used as well as ...
THIS PIC I understand it to be taken in Portugal in 1965. The cars history was written up in a mag a while ago? I ...
... into racing Elans. Tony G did lose a wheel at Thruxton after an outer shaft failure at one race but he didn't roll. Len was still racing his ...
And Team Surbiton Motors cars together again after more than 30 years. I found TonyT to be completely straight and honest in all my dealings ...
... to fit. Front suspension to build up and fit. Rear suspension and drive shafts to fit. Little else was required apart from set up time, I ...
58. Rally Elans. : Racing - Page 2 by LotusElan.net [Racing]
While I was looking through a few CCCs for information on BRM Elans (unfruitfull!) I came accross a letter from Ian Walker in the June'71 ...
... rear of the chassis to cope with flying' and also make sure the drive shafts do not lock when you take off and break the diff. 1966 Belgium ...
59. Diff Oil Cooler FIA : Racing by LotusElan.net [Racing]
Do you know if a differential oil cooler is allowed for a Elan GTS? Do not see any info about such oil cooler for the ...
... have to deal with the HTP assessors....good luck. 661 The roller spine rear drive shafts were fitted to S2 26R's as standard, from memory they may even have ...
26GTS build for FIA racing. I have to say I feel uncomfortable loading the trunnion abnormally by pushing the ball joint rearwards any further in ...
... . I want to add degrees without straining/binding the trunnion/vertical link shaft. I may have a solution but it requires some bespoke bushes for the ...
Search took 0.137 seconds