LotusElan.net Unified Search
Search results for: cv shafts in category "Racing"
5 results found containing all search terms. 60 results found containing some search terms.
5 pages of results.
Sorted by relevance / Sort by date
16. Elan 26r : Racing by LotusElan.net [Racing]
Am building a replacement gearbox for a circuit elan. Using a mag bellhousing,tailcasing & a billet gearlever is a well trodden & trouble free path ...
... ) with all ali case parts to a semi-close cast iron gear case and tail shaft housing, the ali bell housing will remain. This is just to get ...
17. Steering Column Clamp : Racing by LotusElan.net [Racing]
I have fitted a pedal box with a balance bar adjuster to the Elan I am building for racing. However the clutch peddle now clashes ...
... pedal to clear the column-or remove the cluster and re space the top shaft for the pedal placement-ed twincamman Don't change gear and turn corners at ...
Thanks Keith, - seems to be a very sensible mod to do ! I'll definately do it, after having rebuilt my box. - oil-type ; ...
... number plate area that face down .. gets a lot more air through the prop shaft tunnel ! ( as well as 26R diff scoop ) davidholroyd David, thanks ...
19. Magnesium Parts : Racing by LotusElan.net [Racing]
I will be putting together a new drive train. Are there any issues to be concerned about relative to using magnesium and/or aluminum? (Bell housing, ...
... using magnesium and/or aluminum? (Bell housing, gear case, tail shaft, diff nose) Also, Kelvedon offers a "quick release" bell ...
20. Sequential gearbox : Racing by LotusElan.net [Racing]
Hia All, Has anyone ever fitted a sequential gearbox in an Elan ? If so what type ? Thanks Gino Milano italy
... have thought the clutch actuation would be with a slave cylinder concentric to the input shaft. CBUEB1771 CBUEB1771 wrote: gino1 wrote: Hia All, Has anyone ever ...
21. Elan Vintage Racers : Racing by LotusElan.net [Racing]
Good afternoon, all. First time poster here. I've been bitten by the Vintage Racing bug, and have been researching an Elan as my vehicle of ...
... makes them legal? Last question- removal of the rubber doughnuts in favor of CV joints in the rear suspension- again, homologated and therefore recognized by the ...
David Source a wide ratio form Small ford Spares of like as spares box if its the shafts etc, they are less desirable and still ...
... a wide ratio form Small ford Spares of like as spares box if its the shafts etc, they are less desirable and still around. If the gear clusters ...
Hi, anyone have experience with Spyder's rear double wishbone suspension on the track? Am I better off with the original set-up? Have full CV conversion, ...
... on the track? Am I better off with the original set-up? Have full CV conversion, 13" KO Plus 2 alloy wheels. TIA. Cheers, ...
24. Elan Race Prep circa 1973 : Racing by LotusElan.net [Racing]
There was no instruction book for this in 1973. It was all seat of the pants engineering and what looks right might just be right. ...
... engagement type. The weakness was that 2nd and 3rd gears rotate on the main shaft without any bearings while 1st gear uses a steel bushing keyed to the shaft ...
I'll check paper work as it was shipped to Australia, the S2 26R was definitely in period with parts as specified in parts list, the ...
... had long suspected these were required to be able to fit the S2 diff output shafts and the S2 outer hub shafts. The original owner, Dr Counts, ...
Just weighed my car whilst setting up the corner weights and it only weighs 550 Kgs. SI homologated weights are 580kgs that means a massive ...
... 538. any one want want to buy a magnesium gearbox casing, aluminium tail shaft and mag bellhousing ! Andy batfish Mag gearbox casing was never homologated so far ...
Finally got around to post some photos from the Phillip Island meeting back in February. My new engine and stiffer front suspension got me my ...
... Ive brought a second elan in from usa. Great disappointment. Now need everey shaft in the gearbox replaced. Do you know of any gearbox help or i'll ...
28. Shortened Jackshaft : Racing by LotusElan.net [Racing]
The jackshaft in my twin cam has been shortened to about 1/3 the original length by a PO. I've been told that that's a mod ...
... drag which may be more like 1 hp at high engine speeds for half the shaft and a large diameter cam bearing like this and when every hp costs you ...
The cam end is drilled and tapped for a longer sprocket bolt. The longer bolt runs past the first bearing and holds this section of ...
... hole and radial groove to feed oil from the first cam bearing down the cam shaft to the other bearings regards Rohan rgh0 Thanks Rohan Petter Petter Hval rgh0 wrote ...
I agree Rohan, my Group S 1750 with the Benica Brothers prepared a head made 178bhp and solid torque, which at the time was about ...
... particularly with 2litre Alfetta's is use of one of the flywheel, and lightweight prop shaft. The guy who ran the Iso retired from racing a few years ago ...
Search took 0.141 seconds