tools
3 posts
• Page 1 of 1
If any one is interested, made a fixture for pressing bushings into and out of the rear A arms. One end has a larger hole for the large end and the other smaller for the outer end. This way no loads passed through the arm. I don't know if they would distort if load passed through but why take a chance, plus I got to use some tools and scrap metal. The mandrel for the press has a guide pin to keep the bushing straight and a recess you can't see in the photo so only pressing on outer metal edge of bushing.
- GLB
- Second Gear
- Posts: 158
- Joined: 31 Jan 2018
Bill Williams
36/6725 S3 Coupe OGU108E Yellow over Black.
36/6725 S3 Coupe OGU108E Yellow over Black.
- billwill
- Coveted Fifth Gear
- Posts: 5062
- Joined: 19 Apr 2008
3 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 13 guests