Cosworth BDJ $4800 on race cars

PostPost by: holywood3645 » Fri Feb 21, 2014 8:47 am

Is there anyone here that would have any interest in some Cosworth BDJ now listed on race-cars.com?

Cosworth
Front BDA cover
BDA Cam Cover FORD
BDA Cam tray
BDA Head Bare (3 bolt exhaust) no cracks
BDH/J Block steel caps, new liners.
Cosworth BDJ steel Crankshaft 1100 cc (-10)
Badger forged Pistons 81mm, 41.8 to 41.825 pin height.

http://www.race-cars.com/engsales/coswo ... 4671ss.htm

James
Last edited by holywood3645 on Sun Mar 09, 2014 1:29 am, edited 4 times in total.
User avatar
holywood3645
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1102
Joined: 07 Oct 2003

PostPost by: StressCraxx » Fri Feb 21, 2014 3:45 pm

Hello James

I am interested in the kent parts. Sending PM
There is no cure for Lotus, only treatment.
User avatar
StressCraxx
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1415
Joined: 26 Sep 2003

PostPost by: Elan45 » Sat Feb 22, 2014 12:12 pm

Hi James,

I am interested in most of the parts, the BDJ stuff for my '76 Modus FC car and the pushrod NCF stuff for my Lotus FJr.. Normally, BDJ/ BDH blocks are shorter than twin-cam,, same as a 105E, but 5 main bearing. They are usually 711M blocks but differ from the 1600 Pinto block by the AA or AB suffix, don't remember which.

I'm sending you a PM, but I don't trust them since last time I did, I got no response.

Roger (SARL forty-five at hotmail dot com)
'67 Elan S3 SS DHC
'67 Elan FHC pre-airflow
'67 Elan S3 SE upgrade to 26R by Original owner
'58 Eleven S2 (ex-works)
'62 20/22 FJ (ex-Yamura)
'70 Elan +2S RHD
'61 20 FJ project
'76 Modus M1 F3
Elan45
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 2518
Joined: 23 Nov 2008

PostPost by: Elan45 » Sat Feb 22, 2014 12:13 pm

Oh and James, please send some photos of the injection components.

Roger
'67 Elan S3 SS DHC
'67 Elan FHC pre-airflow
'67 Elan S3 SE upgrade to 26R by Original owner
'58 Eleven S2 (ex-works)
'62 20/22 FJ (ex-Yamura)
'70 Elan +2S RHD
'61 20 FJ project
'76 Modus M1 F3
Elan45
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 2518
Joined: 23 Nov 2008

PostPost by: holywood3645 » Sun Feb 23, 2014 1:29 am

Photos sent.
Complete List as follows:

Cosworth

Front BDA cover
BDA Cam Cover FORD
BDA Cam tray
BDA Head Bare (3 bolt exhaust) no cracks
BDH/J Block steel caps, new liners.
Cosworth BDJ steel Crankshaft 1100 cc (-10) $1000
Badger forged Pistons 81mm, 41.8 to 41.825 pin height

Cross flow head, FF
40 DCOE to crossflow manifold
Cosworth valve cover pushrod Kent
Twin 40DCOE31s
Hilborn Injection BDA
ATI Alloy ford 1600cc sump (sold)
Smiths Heater VGC
Weber back plate
KARB Ford alloy rocker cover. Rocker shaft intergral to cover.

General pics of parts below: Open to Offers!
Attachments
photo 3.JPG and
photo 2.JPG and
User avatar
holywood3645
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1102
Joined: 07 Oct 2003

PostPost by: elangtv2000 » Sun Feb 23, 2014 6:12 pm

James,
Sent you a pm asking for prices on each of the BDA parts.
Thanks,
Greg
Thanks,
Greg
User avatar
elangtv2000
Third Gear
Third Gear
 
Posts: 240
Joined: 07 Jun 2006

PostPost by: holywood3645 » Sun Mar 09, 2014 12:52 am

Just posted the BDJ as a kit on race-cars.com
$4800

1098 BDJ for sale Cosworth , Steel crank, New 81mm piston, Block Steel caps (81mm) cam tray and BDJ 3.545" thick head, Cam cover. fitted with Hilborn injection system etc

http://www.race-cars.com/engsales/coswo ... 4671ss.htm
User avatar
holywood3645
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1102
Joined: 07 Oct 2003

Total Online:

Users browsing this forum: No registered users and 26 guests