Cleaning Brake Calipers

PostPost by: fattogatto » Thu Jul 28, 2016 3:10 pm

Anyone have thoughts (pro or con) on using a heated sonic cleaner to clean brake calipers? Solution is 50% water and 50% Simple Green. Obviously a thorough cleaning (using brake clean that is not harmful to rubber) to remove any traces of water would be required after the event.
Charlie Warner
Fatto Gatto Racing
User avatar
fattogatto
Third Gear
Third Gear
 
Posts: 261
Joined: 23 Sep 2015

PostPost by: Elan45 » Fri Jul 29, 2016 1:53 pm

I agree w/ you, just no petroleum based solvents. I use denatured alcohol for general cleaning and finish off w/ brake clean. I also make up a tool using a small radial brush from " Dremal" to clean inside the seal grooves. I use a piece of aluminum, perhaps 3/8 diam about 6 in long. Drill an 1/8 through hole near the end and a small tapped hole in the end to lock the brush into the 1/8 in hole. Use a circular motion to clean grooves. Works a treat.

Roger
'67 Elan S3 SS DHC
'67 Elan FHC pre-airflow
'67 Elan S3 SE upgrade to 26R by Original owner
'58 Eleven S2 (ex-works)
'62 20/22 FJ (ex-Yamura)
'70 Elan +2S RHD
'61 20 FJ project
'76 Modus M1 F3
Elan45
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 2518
Joined: 23 Nov 2008

Total Online:

Users browsing this forum: No registered users and 35 guests