Gearbox Input Shaft Seal

[RoddyMac17]

Does anyone have a part number (National, SKF etc) for the input shaft seal (late gearbox, 1.0625" ID)? I had ordered a gasket set and seals for the gearbox in my car, but neglected to actually measure the input shaft, and as it turns out I ordered the wrong seal. I'm hoping to source one locally so that I can button the gearbox up next weekend an potentially put the motor and gearbox back in the chassis.

Rod

[joe7]

If your seal ID is 1.0625, then the OD should be 1.625 (1 5/8) x .250, Timken part # 471651 or 100128188, not sure but its one or the other!