Clutch hydraulic pipe position.

PostPost by: john.houston » Sun Sep 01, 2013 5:14 pm

Just putting stuff back on my 69 +2 (rhd) restoration and I would be very grateful if anyone can post a pic or send one of the original position of the clutch and brake pipes . I cant see any holes in the bulkhead where they may have been clipped in position. Also my flexi pipe had a steel 90 degree bracket should this bolt to the bellhousing behind one of the bolts ?Once again a pic would help
. thanks John.
john.houston
Second Gear
Second Gear
 
Posts: 54
Joined: 28 Jul 2006

PostPost by: billwill » Sun Sep 01, 2013 7:38 pm

This was asked recently, so there is a picture nearby. Which a search should find.
Last edited by billwill on Sun Sep 01, 2013 7:41 pm, edited 1 time in total.
Bill Williams

36/6725 S3 Coupe OGU108E Yellow over Black.
billwill
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 5060
Joined: 19 Apr 2008

PostPost by: billwill » Sun Sep 01, 2013 7:41 pm

Bill Williams

36/6725 S3 Coupe OGU108E Yellow over Black.
billwill
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 5060
Joined: 19 Apr 2008

Total Online:

Users browsing this forum: No registered users and 19 guests