Help required - S2 door assembly
4 posts
• Page 1 of 1
Post by: PaulH » Sat Jun 22, 2019 12:06 pm
Hello,
Can someone assist me with some reference pictures for the assembly of an Elan S2 door. I have a small bracket that fixes to the inside top edge near the front. I think it must be to hold the outer weather strip somehow. Pictures of the bracket below:
Fingers crossed someone can help.
Paul
Can someone assist me with some reference pictures for the assembly of an Elan S2 door. I have a small bracket that fixes to the inside top edge near the front. I think it must be to hold the outer weather strip somehow. Pictures of the bracket below:
Fingers crossed someone can help.
Paul
66 Elan S2
- PaulH
- Second Gear
- Posts: 136
- Joined: 08 Apr 2009
Post by: Emma-Knight » Sat Jun 22, 2019 3:06 pm
Paul, at the position of the front windowchannel, there is an upright slot in the inner door skin, with a small drilling. This will accept a long reach spire clip. This is were the screw goes, with the alluminium angle to hold the crome weather strip assy to the upper door edge.
Anna
Anna
1965 S2
- Emma-Knight
- Third Gear
- Posts: 372
- Joined: 26 Mar 2004
Post by: PaulH » Sat Jun 22, 2019 4:06 pm
Emma-Knight wrote:Paul, at the position of the front windowchannel, there is an upright slot in the inner door skin, with a small drilling. This will accept a long reach spire clip. This is were the screw goes, with the alluminium angle to hold the crome weather strip assy to the upper door edge.
Anna
Thank you Anna, I'll have a go and see if I can make sense of it.
66 Elan S2
- PaulH
- Second Gear
- Posts: 136
- Joined: 08 Apr 2009
4 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 25 guests
Site map
SitemapIndex
RSS Feed