Another fuel cap post
9 posts
• Page 1 of 1
Does anybody know where this part is from....assuming it is a Lotus bit!
I was messing about with the fuel filler on my Plus 2 and this part appeared next to it.
Anyhow I took the cap apart to see if it had come from the cap but cannot see where it comes from.
Any ideas?
I was messing about with the fuel filler on my Plus 2 and this part appeared next to it.
Anyhow I took the cap apart to see if it had come from the cap but cannot see where it comes from.
Any ideas?
- TimD
- New-tral
- Posts: 3
- Joined: 25 Jan 2017
- Location: Worcestershire
Looking at mine (pic attached) it looks like the spring which sits in the cap close to the hinge and behind the rubber closure. My cap is original (not locking) and renovated, but I seem to remember that originally the steel/rubber closure was not removable (needed the centre drilling out). Good luck getting it back in! The whole cap can be removed, but it needs the hinge roll pin to be drifted out.
- andywatts
- First Gear
- Posts: 33
- Joined: 08 Jul 2010
- Location: Cheshire, UK
- andywatts
- First Gear
- Posts: 33
- Joined: 08 Jul 2010
- Location: Cheshire, UK
If you you take it apart you might be able refit it. Or new caps are available.
'73 +2 130/5 RHD, now on the road and very slowly rolling though a "restoration"
- mbell
- Coveted Fifth Gear
- Posts: 2764
- Joined: 07 Jun 2013
- Location: Austin, TX (UK Ex-pat)
If you drift out the scroll pin remove all including filler tube from car.
Otherwise you will risk cracks in body from the shocks.
Alan
Otherwise you will risk cracks in body from the shocks.
Alan
Alan.b Brittany 1972 elan sprint fhc Lagoon Blue 0460E
- alan.barker
- Coveted Fifth Gear
- Posts: 3870
- Joined: 06 Dec 2008
- Location: BRITTANY FRANCE
Many thanks for the replies, at least I know where the thing came from now.
I will have a look at putting it back in; but as I guess it is only to add a bit of friction to the hinge it might be surplus to requirements.
Thanks
Tim
I will have a look at putting it back in; but as I guess it is only to add a bit of friction to the hinge it might be surplus to requirements.
Thanks
Tim
- TimD
- New-tral
- Posts: 3
- Joined: 25 Jan 2017
- Location: Worcestershire
I think it holds the lid open while filling. So does have a purpose but can probably survive with out it.
'73 +2 130/5 RHD, now on the road and very slowly rolling though a "restoration"
- mbell
- Coveted Fifth Gear
- Posts: 2764
- Joined: 07 Jun 2013
- Location: Austin, TX (UK Ex-pat)
My non-locking cap doesn't have this, but stays open well enough without it. Were there more than one supplier for caps?
1970 Elan Plus 2 (not S) 50/2036
2012 BMW R1200GS
"It just wouldn't be a complete day if I didn't forget something!" -Me
2012 BMW R1200GS
"It just wouldn't be a complete day if I didn't forget something!" -Me
-
The Veg - Coveted Fifth Gear
- Posts: 2398
- Joined: 16 Nov 2015
- Location: Atlanta 'burbs (southeast USA)
Maybe 2 suppliers and the second one begins with Cxxxx.
Alan
Alan
Alan.b Brittany 1972 elan sprint fhc Lagoon Blue 0460E
- alan.barker
- Coveted Fifth Gear
- Posts: 3870
- Joined: 06 Dec 2008
- Location: BRITTANY FRANCE
9 posts
• Page 1 of 1
Total Online:
Users browsing this forum: Briggs1, GEORDIE, paddy and 15 guests