Plus 2 rear ride height

[LotusEngineeringBuff]

My Plus 2 130S has the ride height spot on the height specified in the workshop manual. I.e. 1193mm. Assuming the car is balanced front and back (which it is, as measured between the bottom of the chassis and the ground, it must have the correct ride height at the back.

Here's a page where you can see it from the side
https://obswww.unige.ch/~wildif/cars/lo ... 164559.jpg

Cheers
François

[2tmike]

Thanks Francois, that's exactly how I thought it should look rather than the back seeming to be 'jacked up'