Page 1 of 1
Pozidrive screws
Posted:
Mon May 16, 2022 1:25 am
by pudge2260
Looking for a source who can provide chrome plated pozidrive screws. Restoring a 1970 +2 and as you know there are several lengths and sizes needed.
Re: Pozidrive screws
Posted:
Mon May 16, 2022 8:06 pm
by RichardHawkins
Pudge,
My car is an S4 Elan, I bought stainless screws and polished the heads. Quite a lot of work, but I am pleased with result and there is no chrome to flake off.
Richard Hawkins
Re: Pozidrive screws
Posted:
Tue May 17, 2022 8:04 am
by Steve Brooks
Hello, like Richard if I replace a screw, I change it for a stainless steel one.I normally use Spalding fasteners.
Re: Pozidrive screws
Posted:
Tue May 17, 2022 8:09 am
by Lotusian
+1 for Spalding Fasteners.
Polishing stainless is easy if you have a lathe or use an electric drill held in a vice.
Ian
Re: Pozidrive screws
Posted:
Tue May 17, 2022 10:08 am
by HCA
Technically, you should be using Phillips head screws. Similar, but providing you know the screws are Pozi and use the correct drive you will be ok.