Re: Starting to tackle +2 resto....
Posted: Fri Apr 08, 2022 9:38 pm
Personally I wanted to keep fairly original, so ground and reglassed the flange and the inner shell.. having measured / marked the positions of the holes.
I have seen a variety of screws used..... I used cheese/slot. cap/socket could look good.. I ground the edge of washers that were a little large so that it hopefully lasts.
I have seen a variety of screws used..... I used cheese/slot. cap/socket could look good.. I ground the edge of washers that were a little large so that it hopefully lasts.