Brake Line fittings

PostPost by: ElanAndy » Sun May 12, 2019 12:50 pm

Hoping you guys may be able to help me out please. I have a 1970 plus 2 and I am currently running new cupro nickel brake lines. I am finding it difficult to identify what flare and fitting I need to connect the hard line to the flexible pipes. I have purchased the stainless braided flexible hoses here in the UK. I am just trying to make sure I have got the lines correct before moving on with the restoration!
Any advice would be helpful!
Cheers guys
Andy
Attachments
20190512_113653-1209x1612.jpg and
ElanAndy
New-tral
 
Posts: 9
Joined: 02 Jul 2017

PostPost by: oldelanman » Sun May 12, 2019 5:40 pm

Andy,
Assuming your braided hose is the same thread as the original it will be 3/8" UNF and requires a female nut with double pipe flare.
brake_flare_information.jpg
brake_flare_information.jpg (57.33 KiB) Viewed 1512 times
Roger
S4 DHC
oldelanman
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1967
Joined: 02 Jan 2008

PostPost by: StressCraxx » Sun May 12, 2019 5:44 pm

That?s a beautifully done ?bubble? flare. It?s made with the first step of a double flare. The end prep is really important to keep it from cracking. Buy a good double flare tool kit and practice making them. I do my best bubble flares when I forget to slide the flare nut on first......

Regards,
Dan
There is no cure for Lotus, only treatment.
User avatar
StressCraxx
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1414
Joined: 26 Sep 2003

PostPost by: Bud English » Sun May 12, 2019 5:55 pm

Good info with diagrams here on the Fedhill web site. They are also a good source for supplies for those in the US. No affiliation, just a satisfied customer.

http://www.fedhillusa.com/?page=techhelpdir
Bud
1970 +2S Fed 0053N
"Winnemucca - says it all really!!"
Bud English
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1081
Joined: 05 Nov 2011

PostPost by: arcangel » Sun May 12, 2019 7:38 pm

This article give the most usable information that I could find on the different types of automotive brake flares:

http://racetrackdriving.com/tech/brake- ... ed-bubble/

If you match the stock flare type, both male and female as either a "bubble" or "double" flare and make your new flares accordingly, it's hard to go wrong. Most of the stock Elan/Europa brake lines I've come across have been the "bubble" type. What type of end fittings did your S/S flex lines come with.
arcangel
First Gear
First Gear
 
Posts: 19
Joined: 01 Nov 2004

Total Online:

Users browsing this forum: No registered users and 19 guests