early plus 2 speaker grills.

[bill griffiths]

Originally, these grills were basically oblong, with rounded corners but with slightly curved sides and ends.
Larger speakers can be hidden beneath them but I would like to preserve the look of the grilles
as seen through the rear screen.
I would be delighted if a kind person would do a tracing or an outline of an original grill together with an idea of the profile so I can make a couple which will look authentic!
Thanks so much for any assistance.
Regards
Bill Griffiths.

[TeeJay]

Hi Bill.
These are photos of my refurbished my 1968 +2 rear parcel shelf.
If you confirm these are the items you require measurements, I will measure and confirm.

[wotsisname]

I have these currently off my car.. so have hopefully got the measurements you are after. I don't have a profile guage to get the exact shape. The inner edge is near , but not quite vertical and shorter than the outer edge to allow for the grille. Hopefully the pictures make sense.

1:1 scale, speaker surround

Measurements shown are for the pair. Bolts are 36mm long ( includes surround thickness), shank is 11.2mm, thread 3.5mm dia.. need to check thread.

[wotsisname]

More

Rough guide to profile

Speaker surround, early +2. Believe original

[wotsisname]

And the grilles which may be OE. I resprayed black (satin Matt) and the surround with crackle finish . The original finish seemed to be not quite crackle but not a good coat of flat black either.. (car was 18yr old when I took these off)

Grille underside

Topside

I've yet to buy any speakers, so interested in what others have found to work.

Adrian