Lotus Elan and Lotus Elan Plus 2 Forums

Hello Chris,

I'm amazed by the work that you've put into the car and what a lovely colour you've chosen!
It really suits the car and, and you said, will show off all the shiny new chrome plated parts!

Mark

Thank you all the complements are great, was a bit worried about going on original with the colour, but figured I don't want to sell it and it's for me anyway Wow very useful rebuild pics on the lock, as you say mine are quite badly worn the same both sides, the door hinge rods and bushes were worn so I've got new ones now, there is a lot in the door rebuilds, as I have completely removed all internals !

Ok so I started to put the wiring back into the car, I haven't painted the engine bay yet, as I was going to save this for a winter project, but I discovered a lot of the things that bolt to the bulkhead have a nut or bolt on the behind dash side !
So I decided to stop putting the interior together this morning and swithsched to stripping the engine bay, at this point I think I will also remove the head and send to some one to port and polish and convert to unleaded.
I've also bought all new grommets so would be a bit backwards to put all that in and then take out again later possibly damaging new parts
Will keep it black in there, that way if I ever want to make it red again or someone in the ( distant ) future decides to repaint or put backnto original colour it will be easier

I notice that your car has a cut out on both sides for the pedal box, mine is O/S only, probably another quirky Lotus piece of assembly

Ahh was going to ask about that acctually, as mine also has the federal interior, and a non standard dashboard, I had heard of some cars that were made lefthand drive but never sold so were converted to righthand drive, so I think it's either one of these or maybe a later convert, but the documents don't mention any import thing so I think never left the country

My early +2 (1968) has the two cutouts. The LHS (passenger) is blanked off with a plate (rubber gasket /sealant). On mine the wiper motor is laid on it's side, U-clamped on top off a wooden block. From pictures (and lack of holes in the engine bay) I believe this is the original position for the earlier cars.

Oh well maybe it's just a normal one then, seams to be lotus chopped and changed a few bits while making them from what I hear

Bad picture but for some new spotlights on her, got some with covers as there quite vunrable down there, and freshly painted wheel, rest is dirty though and a few engine compartment bits going back in, I will give the engine compartment a thorough go over in the future I think, money and time are starting to get thin now as I want to drive her this summer

To be honest immnot happy with the engine bay at the moment, the paint reacted a bit, it appears that it was hammerite hand painted previously, and there are parts that I wanted polishing properly and renewing, it all works fine but I think I will do a full engine out overhaul of the bay and engine next year

Chris5360 wrote:I have one slight problem though the drivers side door latch (the bit that goes on the door) is damaged beyond repair and I can't find another one !

If you are still looking I believe they are off the normal BLMC porridge.
Marina / Allegro / Dolomite etc etc.

Same as the interior handle.

Vince

If you are still looking for a door latch there should be some still on my spare doors. Don't think I stripped them off before storage. I'll have a look if you still need them.
Cheers
Simon

Hi Simon if you have some I would definatly be interested in buying them from you, I've been eyeballing eBay every day in hope

Starting to look a bit more complete, would be nice to have some new rubbers for the side lights though

Chris5360 wrote:Hi Simon if you have some I would definatly be interested in buying them from you, I've been eyeballing eBay every day in hope

Hi Chris,
This is what I have.


Have a think as to what you want to offer for them.
I have given them a bit of a clean and they work ok I think. Just could do with a bit more of a grease up as they are a bit dry, I did a bit but you would probably want to open them and do it more inside.

Cheers, Simon

Hi Simon it's more the drivers side that I need really shot blasted the passengers side yestaerday and it acctually came up pretty good, Not sure on values ,but was going to look on eBay to see previously sold prices,unless you have a price in mind, guess it's no secret that it's like the one part I'm after as I've mentioned ed it before so my negotiating is out the window are you happy to sell just the drivers side or do you want them to go as a pair ?