Boot seal

[prezoom]

Looking for a source for a new seal around the boot lid. What I would like, is a clip on seal, with a bulb along the top. Any Ideas? The seal I say on RDent's site doesn't quite look right.

[jono]

I got one from Sue Miller - I think it's a fairly standard/available profile.

Jon

[TeeJay]

As Jon has said, available from the usual suppliers.

I purchased mine from Paul Matty 3.5 meters. here's the link:-

https://paulmattysportscars.co.uk/produ ... per-metre/

[Briggs1]

I recently replaced mine with a bulb seal from Amazon. Fits very well and creates a solid seal.

$35 USD with some left over

Vertical Bulb Trim Seal Bulb Diameter: 0.5" Grip range: 0.039" to 0.14" | Trunk, boot, lid, hood, hatch rubber (20 Feet)

[pharriso]

Like this - https://www.amazon.com/s/ref=nb_sb_noss/156-4760607-5065832?url=search-alias%3Daps&field-keywords=Vertical+Bulb+Trim+Seal+Bulb+Diameter%3A+0.5%22+Grip+range%3A+0.039%22+to+0.14%22?

Looks to be 16 '

[Briggs1]

Phil,

that's the stuff.

Various lengths available.

[prezoom]

Thanks everyone. I didn't dig deep enough.