Page 1 of 1

+2 Under way! And some good luck ...

PostPosted: Mon Dec 03, 2012 2:41 pm
by JGeezer
We are apart and starting the serious stuff:

Image

It looks like I really lucked out, and got one of the meaty "rare and desirable" 701M blocks:

Image

at least according to

http://www.lotus-cortina.com/library/block/blocks.htm

Anybody out there have a parts Stromberg that they might want to deal for a temperature compensator cover?

Image

Thanks!

JGeezer

Re: +2 Under way! And some good luck ...

PostPosted: Mon Dec 03, 2012 4:13 pm
by oldelanman
JGeezer wrote:Anybody out there have a parts Stromberg that they might want to deal for a temperature compensator cover?


If you have no luck finding a used cover new ones are available here......http://www.sucarb.co.uk/ProductDetail.a ... 1&id=32164
and maybe also here......http://www.gowerlee.dircon.co.uk/Stromberg.htm

Re: +2 Under way! And some good luck ...

PostPosted: Mon Dec 03, 2012 6:19 pm
by Elanintheforest
Hello Mr Geezer
Interested in the 701M block and I'm trying to figure out where they were used. I have one in my Escort twincam, as indicated by the document to which you refer. But I think that they may have been used more widely. Does your block have a blanked-off hole at the rear / right side, where the Escort would have its dipstick?

Mark

Re: +2 Under way! And some good luck ...

PostPosted: Tue Dec 04, 2012 2:24 pm
by JGeezer
oldelanman wrote:
JGeezer wrote:Anybody out there have a parts Stromberg that they might want to deal for a temperature compensator cover?


If you have no luck finding a used cover new ones are available here......http://www.sucarb.co.uk/ProductDetail.a ... 1&id=32164
and maybe also here......http://www.gowerlee.dircon.co.uk/Stromberg.htm


Thank you! I had only seen listings for a whole new compensator (at Bean, R.D, ... for > $70) and didn't know you could just buy a new cover. Great!

Re: +2 Under way! And some good luck ...

PostPosted: Wed Dec 05, 2012 1:30 am
by JGeezer
Elanintheforest wrote:Hello Mr Geezer
Interested in the 701M block and I'm trying to figure out where they were used. I have one in my Escort twincam, as indicated by the document to which you refer. But I think that they may have been used more widely. Does your block have a blanked-off hole at the rear / right side, where the Escort would have its dipstick?

Mark


Could be! Is this suspicious looking bit what you mean? (Looking down, above the starter):

Image

Re: +2 Under way! And some good luck ...

PostPosted: Wed Dec 05, 2012 10:40 am
by richardcox_lotus
My 701 Block also has this. Just because its a 701 block doesn't mean its immune from failure though - My number 2 Cylinder burst for no apparant reason..........running a replacement 681 now !

Re: +2 Under way! And some good luck ...

PostPosted: Wed Dec 05, 2012 2:10 pm
by Elanintheforest
Yes, that's the blanked off hole for the dipstick tube for the Escort. I don't know of any other block that seems to have these as 'standard', but it certainly looks like the 701M block was used in cars other than the Escort. Maybe they just made too many, or they had some left over when the Escort Twincam was discontinued in favour of the BDA engined Escort in mid 1970.

Thanks for putting the pictures up.

Mark