Page 1 of 1

Locking Filler Cap

PostPosted: Wed Jun 17, 2009 2:58 pm
by johns
Searched various forums including this one and failed to get an answer. Does anyone know either where to get a new rubber seal for the locking fuel cap on an Elan +2S (tried Sue Miller, Christopher Neil and Paul Matty and they only have complete new caps not the seals) or alternatively where did Lotus source these from? I thought they were the same as the ones used on the GT6 but these are same style but smaller so the seal doesn't fit.

Thanks in advance for your help

John

Re: Locking Filler Cap

PostPosted: Wed Jun 17, 2009 7:06 pm
by Jason1
Hi John

I had the same problem, I am not paying for a new cap every couple of years. :o

Finally tracked them down at SJsportscars SJ026L0007 ?1.20 + post and vat each. I bought a few; much cheaper than a new cap. :D

SJ Sportscars Ltd
Independent Lotus Specialists
Unit 1 Ash Down End
Lords Meadow Industrial Estate
Crediton, Devon EX17 1HN
UK

Tel / Fax: 01363 777790
International: +44 1363 777790

E-mail [email protected]

Hope this helps

Jason

Re: Locking Filler Cap

PostPosted: Thu Jun 18, 2009 9:10 am
by johns
Jason

Many thanks for this. Spoke to Steve this morning and the goods are in the post

John

Re: Locking Filler Cap

PostPosted: Thu Jun 18, 2009 6:12 pm
by Jason1
No problem John.

It took me months to track these down; it seems others deem these seals not worth stocking as they are low value. I like Steve and never just buy one little item.

Another hard to get small item he stocks if you need them are the heater knobs.

Jason

Re: Locking Filler Cap

PostPosted: Fri Jun 19, 2009 9:47 am
by Robbie693
Jason1 wrote:
Another hard to get small item he stocks if you need them are the heater knobs.

Jason


Blimey, I thought they were obsolete - I need some of those, thanks Jason

Robbie

Re: Locking Filler Cap

PostPosted: Fri Jun 19, 2009 4:32 pm
by Jason1
That's what I was told but Steve came up with the goods. ?3.50

See pics on old posting

elan-plus-f13/heater-rebuild-t16068.html

Re: Locking Filler Cap

PostPosted: Sat Jun 20, 2009 4:18 pm
by Spyder fan
Jason1 wrote:Hi John

I had the same problem, I am not paying for a new cap every couple of years. :o

Finally tracked them down at SJsportscars SJ026L0007 ?1.20 + post and vat each. I bought a few; much cheaper than a new cap. :D

SJ Sportscars Ltd
Independent Lotus Specialists
Unit 1 Ash Down End
Lords Meadow Industrial Estate
Crediton, Devon EX17 1HN
UK

Tel / Fax: 01363 777790
International: +44 1363 777790

E-mail [email protected]

Hope this helps

Jason



Jason,
This is a very useful post and thanks John for posing the question. I need a new seal for my own +2 fuel cap and thought I had no option other than a new cap 8)

Re: Locking Filler Cap

PostPosted: Sat Jun 20, 2009 5:17 pm
by Jason1
thought I had no option other than a new cap


That's what Paul Matty's told me! I was told by the MOT tester that this needs to seal so you could potentially have to buy a new cap every year. I asked Rimmer Bros (Triumph specialist) to match the seal but had no luck; they were very helpful though. I asked around at Stoneleigh and Donnington but no luck, by chance I was getting some other parts from SJ and asked if he stocked them and he said he had lots.

I am a big fan of SJ Sportscars as I have always found Steve helpful.

Jason

Re: Locking Filler Cap

PostPosted: Tue Jun 23, 2009 9:04 am
by steveww
The same fuel cap was also fitted to the Scimiter GTE, just in case SJ run out of them.