Page 1 of 1
Cosworth BDJ $4800 on race cars
Posted:
Fri Feb 21, 2014 8:47 am
by holywood3645
Is there anyone here that would have any interest in some Cosworth BDJ now listed on race-cars.com?
Cosworth
Front BDA cover
BDA Cam Cover FORD
BDA Cam tray
BDA Head Bare (3 bolt exhaust) no cracks
BDH/J Block steel caps, new liners.
Cosworth BDJ steel Crankshaft 1100 cc (-10)
Badger forged Pistons 81mm, 41.8 to 41.825 pin height.
http://www.race-cars.com/engsales/coswo ... 4671ss.htmJames
Re: Cosworth BDJ and pushrod parts
Posted:
Fri Feb 21, 2014 3:45 pm
by StressCraxx
Hello James
I am interested in the kent parts. Sending PM
Re: Cosworth BDJ and pushrod parts
Posted:
Sat Feb 22, 2014 12:12 pm
by Elan45
Hi James,
I am interested in most of the parts, the BDJ stuff for my '76 Modus FC car and the pushrod NCF stuff for my Lotus FJr.. Normally, BDJ/ BDH blocks are shorter than twin-cam,, same as a 105E, but 5 main bearing. They are usually 711M blocks but differ from the 1600 Pinto block by the AA or AB suffix, don't remember which.
I'm sending you a PM, but I don't trust them since last time I did, I got no response.
Roger (SARL forty-five at hotmail dot com)
Re: Cosworth BDJ and pushrod parts
Posted:
Sat Feb 22, 2014 12:13 pm
by Elan45
Oh and James, please send some photos of the injection components.
Roger
Re: Cosworth BDJ and pushrod parts
Posted:
Sun Feb 23, 2014 1:29 am
by holywood3645
Photos sent.
Complete List as follows:
Cosworth
Front BDA cover
BDA Cam Cover FORD
BDA Cam tray
BDA Head Bare (3 bolt exhaust) no cracks
BDH/J Block steel caps, new liners.
Cosworth BDJ steel Crankshaft 1100 cc (-10) $1000
Badger forged Pistons 81mm, 41.8 to 41.825 pin height
Cross flow head, FF
40 DCOE to crossflow manifold
Cosworth valve cover pushrod Kent
Twin 40DCOE31s
Hilborn Injection BDA
ATI Alloy ford 1600cc sump (sold)
Smiths Heater VGC
Weber back plate
KARB Ford alloy rocker cover. Rocker shaft intergral to cover.
General pics of parts below: Open to Offers!
Re: Cosworth BDJ and pushrod parts
Posted:
Sun Feb 23, 2014 6:12 pm
by elangtv2000
James,
Sent you a pm asking for prices on each of the BDA parts.
Thanks,
Greg
Thanks,
Greg
Re: Cosworth BDJ and pushrod parts
Posted:
Sun Mar 09, 2014 12:52 am
by holywood3645
Just posted the BDJ as a kit on race-cars.com
$4800
1098 BDJ for sale Cosworth , Steel crank, New 81mm piston, Block Steel caps (81mm) cam tray and BDJ 3.545" thick head, Cam cover. fitted with Hilborn injection system etc
http://www.race-cars.com/engsales/coswo ... 4671ss.htm