Lotus Elan and Lotus Elan Plus 2 Forums

Hi all my name is Nick I am based near stansted airport ,never owned a lotus before but I bought one from the USA which was taken over there in 1980 so it's a uk car .
It's been unused for many years and needs a full restoration, I would like to see if I can get the engine running but the starter is kaput,so a couple a questions ,what's the best book I can buy to help with the rebuild and the best supplier of a high torque starter plus many more parts.
Regards
Nick

Nick,

I have the factory wokshop manual and parts list. I also have "Lotus Elan addendum engineering workshop manual" by Brian Buckland. I don't remember where I got the two factory books from, but Brian's book was from Sue Miller (mickmillerlotus.com). Since Mick died Sue has been running the business as parts operation.

You obviously use lotuselan.net, I have found my branch of club lotus very helpful.

Hop this helps,

Richard Hawkins

Hi Nick and welcome,
As Richard says the workshop manual and Brian Buckland`s book are essential.
The parts list is on here in the wiki section.
I have been satisfied with the Powerlite RAC 472 starter. It is very easy to fit, just two fixing screws and one terminal. Nothing more to do.
You can make it more complicated but in my experience it is not necessary.
I fitted mine five years ago.
Eric in Burnley
1967 S3SE DHC

Thanks guys ,I did my first post on Friday and thought it wasn't being posted so I did another post sorry for the duplicate.
I've bought the starter today from Marty Paul they seemed a nice bunch ,should get it by Friday .
Nick

Nickhad wrote:I've bought the starter today from Marty Paul they seemed a nice bunch ,should get it by Friday .
Nick

I guess that's a backwards Paul Matty!