Lotus Elan and Lotus Elan Plus 2 Forums

Hi ,
New here but owned and still own lotus 7 , Elan sprint , early mini etc .
Here is my take on a spinner tool made with steel stock lying around the workshop.
Need to slip some rubber hose over the forks .
I've had the Tourque wrench on up to 220ft lbs with an old spinner .

...welcome on board Neilson!

PS: put your self down for a CR gearset - need to get the numbers up (see my thread)

It will make your Sprint 'sing'

Jon

jono wrote:...welcome on board Neilson!

PS: put your self down for a CR gearset - need to get the numbers up (see my thread)

It will make your Sprint 'sing'

Jon

Ha ! Spotted !
Nearly ready for a road test - if the box isn't perfect I'll have a gear set .