Page 2 of 2

Re: Rear Hub Puller

PostPosted: Wed Jun 10, 2015 5:08 pm
by Gray
http://www.kelsport.net/parts/product_d ... ctionID=46

new double sided pullers which look good

I tried the SJ cheaper one the other day but insufficient clearance on some specially machined spyder hubs to inset the wheels a little and provide more wheel arch clearance with 14 inch wheels. A few washers and an old spinner worked fine - although there had been no road use. Hubs now being replaced with strengthened TTR ones plus 26R arches, so if anyone wants some spyder machined hubs let me know. Tony Thompson also kindly sent me some wheel drive pegs free the other day to go with the hubs, although are not shown as being supplied with the hubs.