Superflex +2 lower shock absorber bushes
2 posts
• Page 1 of 1
Hi, Has anybody managed to fit these bushes on the original front ones, the ones that clamp the anti roll bar.
The diameter is approx 1/16" too small, I have contacted Superflex they said plenty of grease and push hard.
I have tried this, also warm water, having just done the anti roll bar I thought I would change these as well.
The existing rubber ones are still fine so it's not a real problem.
Thanks John
The diameter is approx 1/16" too small, I have contacted Superflex they said plenty of grease and push hard.
I have tried this, also warm water, having just done the anti roll bar I thought I would change these as well.
The existing rubber ones are still fine so it's not a real problem.
Thanks John
- checkrail
- Third Gear
- Posts: 241
- Joined: 17 Oct 2018
2 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 15 guests