S3 Brake Caliper Overhaul
Posted: Sat Mar 06, 2021 12:08 pm
I am about to overhaul the front and rear calipers with new pistons and seals my 1966 S3.
The workshop manual says that once you've removed the pads you can pump the pistons out to the disc to ease removal of the old pistons once the calipers are on the bench. Is this true as I don't want the piston to pop out beyond the seal and end up with a flood of brake fluid!
The workshop manual says that once you've removed the pads you can pump the pistons out to the disc to ease removal of the old pistons once the calipers are on the bench. Is this true as I don't want the piston to pop out beyond the seal and end up with a flood of brake fluid!