Page 1 of 1
Track rod end thread
Posted:
Mon May 07, 2018 11:58 am
by 69S4
Anyone know what the thread pitch is for the track rod ends - trying to adjust toe in. As far as I know it's the original rack and track rods as fitted by Lotus back in 69.
Re: Track rod end thread
Posted:
Mon May 07, 2018 12:29 pm
by elanman999
They are 1/2" UNF, which has a pitch of .050".
Cheers
John
Re: Track rod end thread
Posted:
Mon May 07, 2018 12:52 pm
by 69S4
That's fantastic. Thanks.
Re: Track rod end thread
Posted:
Mon May 07, 2018 1:45 pm
by Craven
It?s a rolled thread therefore the diameter is larger than the bar on which it?s formed, you cannot increase the thread length with a die.
FWIW.
Re: Track rod end thread
Posted:
Mon May 07, 2018 2:37 pm
by 69S4
Craven wrote:It?s a rolled thread therefore the diameter is larger than the bar on which it?s formed, you cannot increase the thread length with a die.
FWIW.
Not trying to do anything like that. Just adjusting the toe and needed to know how much one turn of the track rod would extend / contract the arm by.