rear wishbone bush
Posted: Sat Feb 03, 2018 12:18 pm
As my diff is being overhauled I thought I'd use the opportunity to replace rear wishbone bushes.
On the inners, the front one was poly bushed but the rear has an unusual (almost rose joint like) three steel tube/two metalastic composition?
This wishbone end is threaded presumably to set up some toe in, but the poly bushes I've got for the inners won't I believe fit into the rear bush mount hole where the present bush sits, I think there's about 5mm difference in the diameter.
I believe the new polybush will fit the forward inner, am just liberating the old one but the rear is going to be a show stopper.
I'll try upload some pix but am wondering if these wishbones might not be originals and wonder if anyone can identify the rear bush and where I can buy replacements from, as I'm thinking they're not standard inners?
cheers
On the inners, the front one was poly bushed but the rear has an unusual (almost rose joint like) three steel tube/two metalastic composition?
This wishbone end is threaded presumably to set up some toe in, but the poly bushes I've got for the inners won't I believe fit into the rear bush mount hole where the present bush sits, I think there's about 5mm difference in the diameter.
I believe the new polybush will fit the forward inner, am just liberating the old one but the rear is going to be a show stopper.
I'll try upload some pix but am wondering if these wishbones might not be originals and wonder if anyone can identify the rear bush and where I can buy replacements from, as I'm thinking they're not standard inners?
cheers