Handbrake adjustment (again)
Posted: Mon Jan 25, 2016 7:51 pm
While trying to adjust my handbrake with new handbrake pads, I came across a problem.
Such that while tring to adjust them I found that one of the pads was touching the disc all the time,
and the other pad was clear. I found that if I pulled the rod from the tree I could pull the pad off the disc,
but as I let go it sprung back on to the disc. If I take the coil expansion spring off, I can adjust the pads as
described in the workshop manual.
Has anyone got any idea why?
Cheers Rich
Such that while tring to adjust them I found that one of the pads was touching the disc all the time,
and the other pad was clear. I found that if I pulled the rod from the tree I could pull the pad off the disc,
but as I let go it sprung back on to the disc. If I take the coil expansion spring off, I can adjust the pads as
described in the workshop manual.
Has anyone got any idea why?
Cheers Rich