Page 1 of 1
Best source for 2.25 rear springs in USA
Posted:
Fri Oct 23, 2015 7:00 pmby Tahoe
This is really a 2 part question. First who do you think is the best source for these springs, and second, what is the best free length to get for the best adjustability? I already have everything else in place except the correct springs.
Re: Best source for 2.25 rear springs in USA
Posted:
Fri Oct 23, 2015 8:55 pmby StressCraxx
My brother was a champ car engineer, he used hyperco because they held their spring rate and free length best.
Re: Best source for 2.25 rear springs in USA
Posted:
Fri Oct 23, 2015 10:48 pmby Tahoe
Thanks for the source. I just noticed RD has 12 inch springs in 90, 100, and 110. So, has anyone here used those springs and was the ride height acceptable with plenty of adjustability? I have 2 sets of Koni fronts and need to determine those rates and come up with a rate for the rear. I'm hoping for a good road set up, nothing too stiff.
Re: Best source for 2.25 rear springs in USA
Posted:
Fri Oct 23, 2015 11:47 pmby john1180
I'm very interested in this information too. Also any US sources for the weld on threaded sleeves and perches for the rear struts? John
Re: Best source for 2.25 rear springs in USA
Posted:
Sat Oct 24, 2015 1:22 amby mbell
Rdent.com
Re: Best source for 2.25 rear springs in USA
Posted:
Sat Oct 24, 2015 3:29 pmby prezoom
As with the above. Hyperco are the only springs to consider.
Re: Best source for 2.25 rear springs in USA
Posted:
Sun Oct 25, 2015 12:37 amby Tahoe
Hyperco does look good. I guess my only real question is the free length. Spring rate is on me, but I don't want to screw up the length. I assume that the 12 inches RDentry supplies must be a good length, as
I've heard nothing negative to date.